Fusion Engineering and Design

An International Journal for Fusion Energy and Technology devoted to Experiments, Theory, Methods and Design

公式サイト

Impact Factor

1.7

Citescore

3.7

最新論文

Planar coil design for the Helios stellarator fusion power plant
Equilibrium optimization of the Helios planar coil stellarator power plant
Core profile prediction and transport analysis of the Helios stellarator fusion power plant
Superconducting planar coils for magnetic field shaping in the Helios Stellarator
Design of the superconducting encircling coils for Helios, the planar coil stellarator

AI解説分析論文一覧

Fusion Engineering and Design

最新論文

Neutronics related integration studies of EU-DEMO pellet injection system

Preliminary engineering assessment of alternative magnetic divertor configurations for EU-DEMO

Developments on the tritium extraction and recovery system for HCPB

The DTT secondary cooling water systems

The EUROfusion materials property handbook for DEMO in-vessel components—Status and the challenge to improve confidence level for engineering data

Membrane gas-liquid contactor for tritium extraction from Pb-Li alloys

Overview of recent ITER TBM Program activities

Service Joining Strategy for the EU DEMO

DTT Thermal Shield: Preliminary thermal analysis

Numerical investigation of purge gas flow through binary-sized pebble beds using discrete element method and computational fluid dynamics

Impact of plasma thermal transients on the design of the EU DEMO first wall protection

Adsorption of hydrogen and deuterium on A-type zeolites at 77 K after various heat treatments

European DEMO first wall shaping and limiters design and analysis status

Insulated fixation system of plasma facing components to the divertor cassette in Eurofusion-DEMO

Thermal-hydraulic modeling and analysis of the Water Cooling System for the ITER Test Blanket Module

The simulation of the application of quasi-snowflake magnetic configuration on the EAST new lower tungsten divertor

Restraining method for delta ferrite in 9Cr-RAFM welded joint

A study on irradiated welding joints in ITER materials and its effects on FMECA analysis of components

Electromagnetic stress analysis of RMP coils during VDEs of the HL-2M tokamak

Plasma characteristics of a tapered coaxial gun and its damage effect on tungsten target

Electrical/thermal stability of GFRP under different intensities γ ray irradiation

Hydrogen-isotope transport in Ti-added reduced activation ferritic/martensitic steel

Investigations on the formation of multi-modal size distribution of mechanochemically processed Cu-Y-CuO powders

The thermal analysis and experimental research of HL-2M vacuum vessel thermal insulation layer

Diffusion bonding W and RAFM-steel with an Fe interlayer by hot isostatic pressing

CFD analysis of the natural circulation of helium in the DEMO cryostat during a leak accident

Development of flow regime maps for lead lithium eutectic–helium flows

Development of a new TZM substrate flowing liquid lithium limiter for high performance plasma discharge in EAST

On thermal axisymmetric liquid-metal divertors

Design of locating system on EAST horizontal Thomson scattering diagnostic

Fusion Engineering and Design

最新論文

Neutronics related integration studies of EU-DEMO pellet injection system

Preliminary engineering assessment of alternative magnetic divertor configurations for EU-DEMO

Developments on the tritium extraction and recovery system for HCPB

The DTT secondary cooling water systems

The EUROfusion materials property handbook for DEMO in-vessel components—Status and the challenge to improve confidence level for engineering data

Membrane gas-liquid contactor for tritium extraction from Pb-Li alloys

Overview of recent ITER TBM Program activities

Service Joining Strategy for the EU DEMO

DTT Thermal Shield: Preliminary thermal analysis

Numerical investigation of purge gas flow through binary-sized pebble beds using discrete element method and computational fluid dynamics

Impact of plasma thermal transients on the design of the EU DEMO first wall protection

Adsorption of hydrogen and deuterium on A-type zeolites at 77 K after various heat treatments

European DEMO first wall shaping and limiters design and analysis status

Insulated fixation system of plasma facing components to the divertor cassette in Eurofusion-DEMO

Thermal-hydraulic modeling and analysis of the Water Cooling System for the ITER Test Blanket Module

The simulation of the application of quasi-snowflake magnetic configuration on the EAST new lower tungsten divertor

Restraining method for delta ferrite in 9Cr-RAFM welded joint

A study on irradiated welding joints in ITER materials and its effects on FMECA analysis of components

Electromagnetic stress analysis of RMP coils during VDEs of the HL-2M tokamak

Plasma characteristics of a tapered coaxial gun and its damage effect on tungsten target

Electrical/thermal stability of GFRP under different intensities γ ray irradiation

Hydrogen-isotope transport in Ti-added reduced activation ferritic/martensitic steel

Investigations on the formation of multi-modal size distribution of mechanochemically processed Cu-Y-CuO powders

The thermal analysis and experimental research of HL-2M vacuum vessel thermal insulation layer

Diffusion bonding W and RAFM-steel with an Fe interlayer by hot isostatic pressing

CFD analysis of the natural circulation of helium in the DEMO cryostat during a leak accident

Development of flow regime maps for lead lithium eutectic–helium flows

Development of a new TZM substrate flowing liquid lithium limiter for high performance plasma discharge in EAST

On thermal axisymmetric liquid-metal divertors

Design of locating system on EAST horizontal Thomson scattering diagnostic

Adsorption of hydrogen and deuterium on A-type zeolites at 77 K after various heat treatments