Fusion Engineering and Design

An International Journal for Fusion Energy and Technology devoted to Experiments, Theory, Methods and Design

公式サイト

Impact Factor

1.7

Citescore

3.7

最新論文

Planar coil design for the Helios stellarator fusion power plant
Equilibrium optimization of the Helios planar coil stellarator power plant
Core profile prediction and transport analysis of the Helios stellarator fusion power plant
Superconducting planar coils for magnetic field shaping in the Helios Stellarator
Design of the superconducting encircling coils for Helios, the planar coil stellarator

AI解説分析論文一覧

Fusion Engineering and Design

最新論文

Fusion Engineering and Design

最新論文

Design, mechanical analysis and manufacturing of the IFMIF LIPAc beam dump shielding

Derivation of bootstrap current fraction scaling formula for 0-D system code analysis

Probabilistic safety assessment and human reliability analysis for the Wendelstein 7-X fusion device

Emissivity measurement of tungsten plasma facing components of the WEST tokamak

Measurement of leakage neutron spectra for zirconium with D-T neutrons and validation of evaluated nuclear data

Low cycle fatigue behavior of electron beam welded joint of CLAM steel at room temperature

A comparison between GDP and PDP experiments of hydrogen permeation through 15 μm Pd60-Cu40% membrane thickness in a micro channel plate type reactor

Concept selection of the automated inspection and maintenance test unit for the EU DEMO using a novel fuzzy-based decision support tool

Tensile and impact properties of tungsten-rhenium alloy for plasma-facing components in fusion reactor

Effect of annealing on the microstructure behavior of D+-irradiated W-2vol.%TiC composite prepared by wet-chemical method

On the feasibility of fusion–fission hybrid based on deuterium fuelled tokamak

The numerical analysis on the variation of electric potential, electric current and Lorentz force with its influence on buoyancy-driven conjugate heat transfer and fluid flow using OpenFOAM

Physical design of the neutralizer for CFETR negative ion based neutral beam injection prototype

Shielding proposal to mitigate the PFC #2 heating due to 16N decay photon radiation from the activated cooling water

Thermal hydraulic design and analysis of updated CFETR water cooled ceramic breeder blanket

Design, installation and operation of in-vessel resonant magnetic perturbation system on the HL-2A tokamak

X-ray imaging diagnostic in the high heat flux test facilities

The properties of the tungsten coating on fine grain graphite using pulsed laser deposition

The generation of sub-millimeter lithium granules from liquid Jet for magnetic fusion applications

Development of the internal matrix reinforcement bronze processed Nb3Sn multicore wires using Cu-Sn-In ternary alloy matrix for fusion magnet application

Study on microstructure change and hardening of 316L steel weld seam after helium ion irradiation

Preliminary assessment of vertical instability with blanket in CFETR

Analysis of the fracture mechanism at cryogenic temperatures of thick 316LN laser welded joints

Proposal of optimized power cycles for the DEMO power plant (EUROfusion)

Magnet coil power supply by a self-excited induction generator with a flywheel for a small tokamak, PHiX

Liquid tin interactions with ISTTOK plasmas

Designing of cooling water system for a pyro-breaker utilized in superconductive fusion facility

Ion source backplate loading due to backstreaming electrons and the arc discharge in the JET EP2 neutral beam injectors

Study of flow instability in parallel channel system for water cooled blanket

Optimum preparation of Fe-Al/α-Al2O3 coating on 21-6-9 austenitic stainless steel

Fusion Engineering and Design

最新論文

Fusion Engineering and Design

最新論文

Design, mechanical analysis and manufacturing of the IFMIF LIPAc beam dump shielding

Derivation of bootstrap current fraction scaling formula for 0-D system code analysis

Probabilistic safety assessment and human reliability analysis for the Wendelstein 7-X fusion device

Emissivity measurement of tungsten plasma facing components of the WEST tokamak

Measurement of leakage neutron spectra for zirconium with D-T neutrons and validation of evaluated nuclear data

Low cycle fatigue behavior of electron beam welded joint of CLAM steel at room temperature

A comparison between GDP and PDP experiments of hydrogen permeation through 15 μm Pd60-Cu40% membrane thickness in a micro channel plate type reactor

Concept selection of the automated inspection and maintenance test unit for the EU DEMO using a novel fuzzy-based decision support tool

Tensile and impact properties of tungsten-rhenium alloy for plasma-facing components in fusion reactor

Effect of annealing on the microstructure behavior of D+-irradiated W-2vol.%TiC composite prepared by wet-chemical method

On the feasibility of fusion–fission hybrid based on deuterium fuelled tokamak

The numerical analysis on the variation of electric potential, electric current and Lorentz force with its influence on buoyancy-driven conjugate heat transfer and fluid flow using OpenFOAM

Physical design of the neutralizer for CFETR negative ion based neutral beam injection prototype

Shielding proposal to mitigate the PFC #2 heating due to 16N decay photon radiation from the activated cooling water

Thermal hydraulic design and analysis of updated CFETR water cooled ceramic breeder blanket

Design, installation and operation of in-vessel resonant magnetic perturbation system on the HL-2A tokamak

X-ray imaging diagnostic in the high heat flux test facilities

The properties of the tungsten coating on fine grain graphite using pulsed laser deposition

The generation of sub-millimeter lithium granules from liquid Jet for magnetic fusion applications

Development of the internal matrix reinforcement bronze processed Nb3Sn multicore wires using Cu-Sn-In ternary alloy matrix for fusion magnet application

Study on microstructure change and hardening of 316L steel weld seam after helium ion irradiation

Preliminary assessment of vertical instability with blanket in CFETR

Analysis of the fracture mechanism at cryogenic temperatures of thick 316LN laser welded joints

Proposal of optimized power cycles for the DEMO power plant (EUROfusion)

Magnet coil power supply by a self-excited induction generator with a flywheel for a small tokamak, PHiX

Liquid tin interactions with ISTTOK plasmas

Designing of cooling water system for a pyro-breaker utilized in superconductive fusion facility

Ion source backplate loading due to backstreaming electrons and the arc discharge in the JET EP2 neutral beam injectors

Study of flow instability in parallel channel system for water cooled blanket

Optimum preparation of Fe-Al/α-Al2O3 coating on 21-6-9 austenitic stainless steel

A comparison between GDP and PDP experiments of hydrogen permeation through 15 μm Pd60-Cu40% membrane thickness in a micro channel plate type reactor