Fusion Engineering and Design

An International Journal for Fusion Energy and Technology devoted to Experiments, Theory, Methods and Design

公式サイト

Impact Factor

1.7

Citescore

3.7

最新論文

Corrigendum to “Improving the Newton cooling model to drive the optimization method for heterogeneous storage of ECRH hot data” [Fusion Engineering and Design 215 (2026) 115715]
Corrigendum to “Relativistic effects on stopping power of plasmas with heavy ions” [Fusion Engineering and Design 205 (2024), 114524]
Corrigendum to “Initial accident scenario analysis in support of a preliminary DEMO tritium plant design” [Fusion Engineering and Design 189 (2023) 113482]
Thermal behaviour of ZrCo getter beds during hydrogen absorption at variable flow rates and concentrations
Performance of the W7-X ECRH gyrotron diamond output window at 2 MW operation

AI解説分析論文一覧

Fusion Engineering and Design

最新論文

Fusion Engineering and Design

最新論文

Effect of preheating on welding cold crack sensitivity of China low activation martensitic steel

Simulation suite for plasma magnetic control at EAST tokamak

Upgrade of ECRH launcher for NTM real-time control on HL-2A tokamak

Chemical forms of hydrogen desorbed by permeation through pure iron and oxide dispersion strengthened steels

Development of depleted uranium bed for tritium fuel cycle and basic absorption/desorption experiments

Correlation of surface chemical states with hydrogen isotope retention in divertor tiles of JET with ITER-Like Wall

Data-acquisition, control & interlock system design for corrosion experiments of IN-RAFM steel with flowing Pb-Li in presence of magnetic field

Influence of intermetallic compounds on the microstructure and strength properties of diffusion bonded W–steel joints using Ti/Ni composite interlayer

Theoretical analysis on the damages for tungsten plasma facing surface under superposition of steady-state and transient heat loads

ITER transfer cask: Preliminary assessment of dose rate due to dust remained in the cask

Numerical and experimental MHD studies of Lead-Lithium liquid metal flows in multichannel test-section at high magnetic fields

EM zooming procedure in ANSYS Maxwell 3D

Influence of the fabrication route of tunsgen-2 wt.% vanadium in the microstructure and mechanical properties

Corrosion experiments on IN-RAFM steel in flowing lead-lithium for Indian LLCB TBM

Measurement of the impacts of the J-TEXT TBM mock-up on the toroidal and vertical magnetic field

Current sharing design of ITER poloidal field converter bridges

RF simulation and improvements of an ion source test facility at HUST

Laser beam alignment for a petawatt picosecond diagnostic system in SG-II laser facility

Two-dimensional numerical simulation of tungsten melting in exposure to pulsed electron beam

Helium irradiation behavior of tungsten-niobium alloys under different ion energies

Thermal properties of pure tungsten and its alloys for fusion applications

Monte Carlo simulation of tritium beta-ray induced X-ray spectrum in various gases

Molecular dynamics simulation on stability and diffusivity of hydrogen around a <111> symmetric tilt grain boundary in bcc-Fe

Retention and release of hydrogen isotopes in carbon materials priorly charged in gas phase

Transport analysis of KSTAR plasmas with between-shot TRANSP

Tomographic reconstruction for a tangentially viewing visible light imaging diagnostic on EAST

Shutdown dose rate analysis with unstructured tetrahedral element based R2S method using deterministic transport solver AETIUS

EAST in-vessel operation manipulator with failure recovery ability

Development of equilibrium fitting code using finite element method in versatile experiment spherical torus

Preliminary study of the X-points control algorithm for advanced divertor configuration on HL-2M

Fusion Engineering and Design

最新論文

Fusion Engineering and Design

最新論文

Effect of preheating on welding cold crack sensitivity of China low activation martensitic steel

Simulation suite for plasma magnetic control at EAST tokamak

Upgrade of ECRH launcher for NTM real-time control on HL-2A tokamak

Chemical forms of hydrogen desorbed by permeation through pure iron and oxide dispersion strengthened steels

Development of depleted uranium bed for tritium fuel cycle and basic absorption/desorption experiments

Correlation of surface chemical states with hydrogen isotope retention in divertor tiles of JET with ITER-Like Wall

Data-acquisition, control & interlock system design for corrosion experiments of IN-RAFM steel with flowing Pb-Li in presence of magnetic field

Influence of intermetallic compounds on the microstructure and strength properties of diffusion bonded W–steel joints using Ti/Ni composite interlayer

Theoretical analysis on the damages for tungsten plasma facing surface under superposition of steady-state and transient heat loads

ITER transfer cask: Preliminary assessment of dose rate due to dust remained in the cask

Numerical and experimental MHD studies of Lead-Lithium liquid metal flows in multichannel test-section at high magnetic fields

EM zooming procedure in ANSYS Maxwell 3D

Influence of the fabrication route of tunsgen-2 wt.% vanadium in the microstructure and mechanical properties

Corrosion experiments on IN-RAFM steel in flowing lead-lithium for Indian LLCB TBM

Measurement of the impacts of the J-TEXT TBM mock-up on the toroidal and vertical magnetic field

Current sharing design of ITER poloidal field converter bridges

RF simulation and improvements of an ion source test facility at HUST

Laser beam alignment for a petawatt picosecond diagnostic system in SG-II laser facility

Two-dimensional numerical simulation of tungsten melting in exposure to pulsed electron beam

Helium irradiation behavior of tungsten-niobium alloys under different ion energies

Thermal properties of pure tungsten and its alloys for fusion applications

Monte Carlo simulation of tritium beta-ray induced X-ray spectrum in various gases

Molecular dynamics simulation on stability and diffusivity of hydrogen around a <111> symmetric tilt grain boundary in bcc-Fe

Retention and release of hydrogen isotopes in carbon materials priorly charged in gas phase

Transport analysis of KSTAR plasmas with between-shot TRANSP

Tomographic reconstruction for a tangentially viewing visible light imaging diagnostic on EAST

Shutdown dose rate analysis with unstructured tetrahedral element based R2S method using deterministic transport solver AETIUS

EAST in-vessel operation manipulator with failure recovery ability

Development of equilibrium fitting code using finite element method in versatile experiment spherical torus

Preliminary study of the X-points control algorithm for advanced divertor configuration on HL-2M

Influence of the fabrication route of tunsgen-2 wt.% vanadium in the microstructure and mechanical properties