Fusion Engineering and Design

An International Journal for Fusion Energy and Technology devoted to Experiments, Theory, Methods and Design

公式サイト

Impact Factor

1.7

Citescore

3.7

最新論文

Corrigendum to “Improving the Newton cooling model to drive the optimization method for heterogeneous storage of ECRH hot data” [Fusion Engineering and Design 215 (2026) 115715]
Corrigendum to “Relativistic effects on stopping power of plasmas with heavy ions” [Fusion Engineering and Design 205 (2024), 114524]
Corrigendum to “Initial accident scenario analysis in support of a preliminary DEMO tritium plant design” [Fusion Engineering and Design 189 (2023) 113482]
Thermal behaviour of ZrCo getter beds during hydrogen absorption at variable flow rates and concentrations
Performance of the W7-X ECRH gyrotron diamond output window at 2 MW operation

AI解説分析論文一覧

Fusion Engineering and Design

最新論文

Real-time control of electron cyclotron wave polarization in the LHD

Benchmark experiments on breeding properties of thorium

A comparative study on the performance of artificial neural networks and regression models in modeling the heat source model parameters in GTA welding

Studies on the requirements and design of the High Voltage Radio Frequency Test Facility

Conceptual design study for CFETR divertor target using CLAM steel as structural material

Determination of critical parameters in the EAST subcooled helium system

Preliminary assessment on safety performance of updated HCCB blanket module for CFETR

Conceptual design of cooling systems for the launcher and receiver mirrors of the ITER LFS-CTS diagnostic

UWAVS first mirror plasma cleaning technology using 30–60 MHz RF discharges

Reduction of hydrogen content in deuterium plasma with mixed graphite and tungsten divertors in EAST

Fabrication and quality assurance of ITER TF conductor in China

Density profile evolution on EAST tokamak by the polarimeter/interferometer system

Electromagnetic force evaluation on the water cooled ceramic breeder blanket for CFETR

The assessment of shutdown dose rate and radioactive waste of HCSB during its replacement in CFETR

Sensitivity study on tritium transport in water cooled solid blanket of China Fusion Engineering Test Reactor

Preparation of Al2O3/Cr2O3 tritium permeation barrier with combination of pack cementation and sol–gel methods

Corrigendum to “Comparative investigations of stainless steel and molybdenum first mirrors cleaning using radio frequency plasma” [Fusion Eng. Des. 112 (2016) 317–323]

Corrigendum to “Neutron activation of impurity seeding gases within a DEMO environment” [Fusion Eng. Des. 124(November) (2017) 892–895]

Multi-dimensional modeling and large-scale simulation of hydrogen absorption/desorption phenomena in metal hydride vessels (MHVs)

Partitioning of tritium between surface and bulk of 316 stainless steel at room temperature

Hypothetical daily operation model of fuel cycle in tritium plant

Tools to export published datasets together with metadata from IDL/Python/MATLAB and πScope

Methodology for the implementation of real-time image processing systems using FPGAs and GPUs and their integration in EPICS using Nominal Device Support

Achievements and lessons learned from the operation of KSTAR plasma control system upgrade

Evaluation of the ITER data archiving network API on the DIII-D tokamak

The ITER CODAC network design

Physicochemical stability under inert and reductive atmospheres of Li2TiO3 produced from Li2CO3 obtained from Argentinean brines

Effects of tritium 2-D distribution on tritium depth profile reconstruction in BIXS measurements

Determination of multichannel MHD velocity profiles from wall-potential measurements and numerical simulations

Plasma physics for fusion reactor system codes: Framework and model code

Fusion Engineering and Design

最新論文

Real-time control of electron cyclotron wave polarization in the LHD

Benchmark experiments on breeding properties of thorium

A comparative study on the performance of artificial neural networks and regression models in modeling the heat source model parameters in GTA welding

Studies on the requirements and design of the High Voltage Radio Frequency Test Facility

Conceptual design study for CFETR divertor target using CLAM steel as structural material

Determination of critical parameters in the EAST subcooled helium system

Preliminary assessment on safety performance of updated HCCB blanket module for CFETR

Conceptual design of cooling systems for the launcher and receiver mirrors of the ITER LFS-CTS diagnostic

UWAVS first mirror plasma cleaning technology using 30–60 MHz RF discharges

Reduction of hydrogen content in deuterium plasma with mixed graphite and tungsten divertors in EAST

Fabrication and quality assurance of ITER TF conductor in China

Density profile evolution on EAST tokamak by the polarimeter/interferometer system

Electromagnetic force evaluation on the water cooled ceramic breeder blanket for CFETR

The assessment of shutdown dose rate and radioactive waste of HCSB during its replacement in CFETR

Sensitivity study on tritium transport in water cooled solid blanket of China Fusion Engineering Test Reactor

Preparation of Al2O3/Cr2O3 tritium permeation barrier with combination of pack cementation and sol–gel methods

Corrigendum to “Comparative investigations of stainless steel and molybdenum first mirrors cleaning using radio frequency plasma” [Fusion Eng. Des. 112 (2016) 317–323]

Corrigendum to “Neutron activation of impurity seeding gases within a DEMO environment” [Fusion Eng. Des. 124(November) (2017) 892–895]

Multi-dimensional modeling and large-scale simulation of hydrogen absorption/desorption phenomena in metal hydride vessels (MHVs)

Partitioning of tritium between surface and bulk of 316 stainless steel at room temperature

Hypothetical daily operation model of fuel cycle in tritium plant

Tools to export published datasets together with metadata from IDL/Python/MATLAB and πScope

Methodology for the implementation of real-time image processing systems using FPGAs and GPUs and their integration in EPICS using Nominal Device Support

Achievements and lessons learned from the operation of KSTAR plasma control system upgrade

Evaluation of the ITER data archiving network API on the DIII-D tokamak

The ITER CODAC network design

Physicochemical stability under inert and reductive atmospheres of Li2TiO3 produced from Li2CO3 obtained from Argentinean brines

Effects of tritium 2-D distribution on tritium depth profile reconstruction in BIXS measurements

Determination of multichannel MHD velocity profiles from wall-potential measurements and numerical simulations

Plasma physics for fusion reactor system codes: Framework and model code

UWAVS first mirror plasma cleaning technology using 30–60 MHz RF discharges