Plasma profiles and flows in the low- and high-field side scrape-off-layer (SOL) regions in Alcator C-Mod are found to be remarkably sensitive to magnetic separatrix topologies (upper-, lower- and double-null) and to impose topology-dependent flow boundary conditions on the confined plasma. Near-sonic plasma flows along magnetic field lines are observed in the high-field SOL, with magnitude and direction clearly dependent on X-point location. The principal drive mechanism for the flows is a strong ballooning-like poloidal transport asymmetry: parallel flows arise so as to re-symmetrize the resulting poloidal pressure variation in the SOL. Secondary flows involving a combination of toroidal rotation and Pfirsch–Schlüter ion currents are also evident. As a result of the transport-driven parallel flows, the SOL exhibits a net co-current (counter-current) volume-averaged toroidal momentum when B × ∇B is towards (away from) the X-point. Depending on the discharge conditions, flow momentum can couple across the separatrix and affect the toroidal rotation of the confined plasma. This mechanism accounts for a positive (negative) increment in central plasma co-rotation seen in L-mode discharges when B × ∇B is towards (away from) the X-point. Experiments in ion-cyclotron range-of-frequency-heated discharges suggest that topology-dependent flow boundary conditions may also play a role in the sensitivity of the L–H power threshold to X-point location: in a set of otherwise similar discharges, the L–H transition is seen to be coincident with central rotation achieving roughly the same value, independent of magnetic topology. For discharges with B × ∇B pointing away from the X-point (i.e. with the SOL flow boundary condition impeding co-current rotation), the same characteristic rotation can only be achieved with higher input power.
Shear-induced Reynolds stress at the edge of L-mode tokamak plasmas