Reviews the neutron measurement techniques that are applied to the study of tokamak plasmas. The range of neutron energies of primary interest is limited to narrow bands around 2.5 and 14 MeV, and the variety of measurements that can be made for plasma diagnostic purposes is also restricted. To characterize the plasma as a neutron source, it is necessary only to measure the total neutron emission, the relative neutron emissivity as a function of position throughout the plasma, and the energy spectra of the emitted neutrons. In principle, such measurements might be expected to be relatively easy. That this is not the case is, in part, attributable to practical problems of accessibility to a harsh environment but is mostly a consequence of the time scale on which the measurements have to be made and of the wide range of neutron emission intensities that have to be covered; for tokamak studies, the time-scale is of the order of 1 to 100 ms and the neutron intensity ranges from 1012 to 1019 s-1.
トカマクプラズマの研究に適用される中性子計測技術について概説する。主たる関心対象となる中性子エネルギー範囲は、2.5 MeVおよび14 MeV付近の狭い帯域に限定され、プラズマ診断のために実施可能な測定の種類も限られている。プラズマを中性子源として特徴づけるためには、全中性子放出量、プラズマ全体にわたる位置の関数としての相対中性子放出率、および放出される中性子のエネルギースペクトルを測定するだけで十分である。原理的には、このような測定は比較的容易であると期待されるかもしれない。しかし実際にはそうではない。その理由は、一部は過酷な環境へのアクセスに関する実用的な問題にあり、しかし主として、測定を実施しなければならない時間スケールと、カバーしなければならない中性子放出強度の広い範囲に起因する。トカマク研究において、時間スケールは1〜100 msのオーダーであり、中性子強度は10¹²〜10¹⁹ s⁻¹の範囲に及ぶ。