FusionPapers
図版検索トレンドwiki日本の研究
© 2026 FUSIONPAPERS
About法務情報
トップに戻る

5. Single-coil tests

1988年Fusion Engineering and DesignIF 1.7出版社

This section describes tests performed on the individual coils energized as single magnets in the IFSMTF. At first, each coil was energized as a single coil up to its rated current I0 (also called 100% excitation). About a year later, after the design-point tests were performed in the full-array configuration, each coil was charged as a single coil to currents higher than its rated value. The results of these tests are also described here; single-coil tests using the pulse coil are discussed in section 7.The WH, GE/OR, and CH coils were not energized prior to the experiments described in this section. Two of the coils, JA and EU, were tested earlier in domestic facilities as single coils. The results of tests on the JA coil at JAERI and those on the EU coil in the TOSKA facility at KfK are described elsewhere [1–4]. An extensive comparison of test results for the PB-cooled JA coil and the FF-cooled EU coil has also been published [5,6]. Where appropriate, comparison with domestic results is presented. The GD coil was energized together with the JA coil in the partial-array test carried out in late summer of 1984. The results of these experiments have been presented elsewhere [7–9]. The superconducting busses of the CH coil were not installed during the partial-array tests; however, the coil was cryogenically connected to the refrigerator. These results were also reported earlier [10].

日本語訳

このセクションでは、IFSMTFにおいて個々のコイルを単独で励磁した試験について説明する。当初、各コイルは定格電流I0(100%励磁とも呼ばれる)まで単独で励磁された。約1年後、設計点試験がフルアレイ構成で実施された後、各コイルは定格値を超える電流まで単独で充電された。これらの試験結果もここに記載する。パルスコイルを用いた単独コイル試験については、セクション7で議論する。WH、GE、CHコイルは、本セクションで説明する実験の前に励磁されていなかった。JAおよびEUの2つのコイルは、国内施設において単独コイルとして先行して試験された。JAERIにおけるJAコイルの試験結果およびKfKのTOSKA施設におけるEUコイルの試験結果については、文献[1–4]に記載されている。PB冷却JAコイルとFF冷却EUコイルの試験結果の広範な比較も公表されている[5,6]。適切な場合には、国内試験結果との比較も提示する。GDコイルは、1984年夏末に実施された部分アレイ試験においてJAコイルとともに励磁された。これらの実験結果は文献[7–9]に報告されている。部分アレイ試験中、CHコイルの超伝導バスバーは設置されていなかったが、コイルは極低温で冷凍機に接続されていた。これらの結果も先に報告されている[10]。

この論文にはまだAI要約がありません。

関連論文

Structural analysis and verification of the ITER TF model coil test conditions

2001Fusion Engineering and Design

First test results for the ITER central solenoid model coil

2001Fusion Engineering and Design

A coil test facility for the cryogenic tests of the JT-60SA TF coils

2011Fusion Engineering and Design

Model coil development and testing for ITER

1995Fusion Engineering and Design

Design and experimental investigation of the ability of large superconducting magnets to operate under nuclear heating

1989Fusion Engineering and Design

7. Tests with pulsed fields

1988Fusion Engineering and Design

Executive summary

1988Fusion Engineering and Design

The ITER magnet system

1997Fusion Engineering and Design

Test of the EURATOM LCT coil (NbTi conductor) with forced flow He II cooling

1999Fusion Engineering and Design

Progress of the ITER central solenoid model coil programme

2001Nuclear Fusion