Tritium has been injected into TFTR supershots using a gas feed containing 2% tritium and 98% deuterium in one or more neutral beam sources. A total of 38 beam-injected tritium shots required about 400 Ci of tritium, of which less than 5% actually entered the plasma. The ratio of D-T to D-D neutron rates varied from about 0.5 to 4.5. A peak neutron rate of 7.7 × 1016 D-T n/s together with 1.7 × 1016 D-D n/s was attained with eight 2% tritium beams delivering 18.7 MW. The measured D-T neutron rates are extrapolated to fusion powers in 50:50 D-T operation with similar plasma parameters. The experiments have also provided data for the D-T calibration of neutron and lost alpha particle detectors and for optimizing tritium beam injection. With the aid of a multichannel neutron collimator, these experiments have enabled the comparison of radial profiles of D-T neutron production and global neutron output with the predictions of simulation codes.
トリチウムは、1つまたは複の中性粒子ビーム源において、2%のトリチウムと98%の重水素を含むガス供給を用いてTFTRスーパーショットに注入された。合計38回のビーム注入トリチウムショットには約400Ciのトリチウムが必要であり、そのうち5%未満が実際にプラズマに入射した。D-T対D-D中性子率の比は約0.5から4.5の範囲で変化した。8基の2%トリチウムビームが18.7MWを供給した際に、1.7×10¹⁶ D-D n/sとともに、7.7×10¹⁶ D-T n/sのピーク中性子率が達成された。測定されたD-T中性子率は、同様のプラズマパラメータを有する50:50のD-T運転における核融合出力に外挿される。これらの実験はまた、中性子および損失アルファ粒子検出器のD-T較正、ならびにトリチウムビーム注入の最適化のためのデータを提供した。多チャンネル中性子コリメータの助けにより、これらの実験は、D-T中性子生成の動径プロファイルおよび全中性子出力と、シミュレーションコードによる予測との比較を可能にした。