AbstractThis paper describes part of the radiation testing of an isolating preamplifier, a part of the ongoing radiation-tolerant electronics development program at SPAR Aerospace. The circuit tested was a relatively simple isolating preamplifier with floating input and output stages with individual on-board voltage converters. The circuit performance was monitored during irradiation to fully characterize the performance in realistically harsh conditions. In doing so it demonstrates some typical radiation degradation and recovery effects. This helps to prove the potential differences in results between on-line radiation testing and passive testing.SPAR has a long history of building equipment for use in hostile environments, including fusion reactors. These fusion reactors have a number of pressing design challenges that would benefit from the development of radiation-tolerant electronics. These include a large number of diagnostic signals to be taken through the cryostat and the control signals for the rather large-scale remote-handling equipment.
本論文は、SPAR Aerospace社で進行中の放射線耐性電子機器開発プログラムの一部として実施された、絶縁型プリアンプの放射線試験について述べるものである。試験対象の回路は、個別のオンボード電圧変換器を備えた浮遊入力段および出力段を有する比較的単純な絶縁型プリアンプであった。回路の性能は、現実的な過酷条件下での特性を完全に評価するため、照射中に監視された。これにより、典型的な放射線劣化および回復効果が実証される。これは、オンライン放射線試験とパッシブ試験の結果の潜在的な差異を証明するのに役立つ。SPAR Aerospace社は、核融合炉を含む過酷な環境で使用する機器の製造において長い歴史を有している。これらの核融合炉には、放射線耐性電子機器の開発から恩恵を受けるであろう差し迫った設計上の課題が数多く存在する。これには、極低温容器を通して導出される多数の診断信号や、かなり大規模な遠隔操作機器用の制御信号が含まれる。