AbstractIn order to conduct the integrated irradiation experiment of fusion blanket with testing reactor, it is indispensable to develop a small motor with high radiation resistance as the irradiation device. Therefore, the small motor was irradiated at the Japan Materials Testing Reactor. From this result of the irradiation test of a small motor, it became clear that the small motor was rotating normally up to the gamma-ray dose of 3.1×107 Gy, the fast neutron fluence of 2.8×1020 n/m2 and the thermal neutron fluence of 5.2×1021 n/m2 at 50 °C. The conductor resistance and the insulation resistance of polyimide coated wire, which did not change until the total gamma-ray dose of 3.1×108 Gy, the fast neutron fluence of 2.8×1021 n/m2 and the thermal neutron fluence of 5.2×1022 n/m2 at 50 °C, were 12 Ω and 1×108 Ω, respectively.
核融合ブランケットの照射試験を試験炉で実施するためには、高い耐放射線性を有する小型モーターを照射装置として開発することが不可欠である。そこで、小型モーターを日本材料試験炉において照射した。この小型モーターの照射試験の結果から、小型モーターは、50 °Cにおいて、ガンマ線線量3.1×10⁷ Gy、高速中性子フルエンス2.8×10²⁰ n/m²、熱中性子フルエンス5.2×10²¹ n/m²まで正常に回転することが明らかになった。また、ポリイミド被覆電線の導体抵抗および絶縁抵抗は、50 °Cにおいて、ガンマ線線量3.1×10⁸ Gy、高速中性子フルエンス2.8×10²¹ n/m²、熱中性子フルエンス5.2×10²² n/m²まで変化せず、それぞれ12 Ωおよび1×10⁸ Ωであった。