AbstractThe JT-60 data processing system is a large computer complex, gradually being modernized by utilizing progressing computer and network technologies. There were three major changes in our system recently. A VME-based fast data acquisition system (FDS) has been developed to enlarge a transient mass-data storage system (TMDS). It can acquire the data of 6 MB per channel with 1 or 5 μs sampling. Now there are three FDSs with 29 channels. The TMDS, which was composed of a mini-computer and 61 channels of 6 MB memory modules with 5-μs sampling, has been replaced with a new system based on the technology of the VME-based fast data acquisition system. One of the outdated auxiliary crate controllers with micro-processor (ACM), which controls CAMAC modules in the crate on the serial highway, acquires data from them and transfers data to the main computer, has been replaced by a workstation with a VMEbus byte-serial highway driver. The combination of a workstation and a VMEbus byte-serial highway driver has been developed and used to replace many mini-computers in our system. A workstation with a digital linear tape (DLT) library has been introduced as final data storage. The conversion of a few terabytes of raw data tapes for a cartridge tape library (CTL), which is attached to a mainframe computer, Fujitsu GS8300, will be started by using data conversion software prepared to handle mainframe data on the workstation.
JT-60データ処理システムは大規模な計算機複合体であり、進歩する計算機技術とネットワーク技術を活用して段階的に近代化が進められている。最近、我々のシステムには3つの大きな変更があった。VMEベースの高速データ収集システム(FDS)が、過渡的大量データ記憶システム(TMDS)を拡張するために開発された。これは、1または5μsのサンプリングでチャンネルあたり6MBのデータを収集することができる。現在、29チャンネルを備えた3つのFDSがある。ミニコンピュータと5μsサンプリングの61チャンネルの6MBメモリモジュールで構成されていたTMDSは、VMEベースの高速データ収集システムの技術に基づく新しいシステムに置き換えられた。シリアルハイウェイ上のクレート内のCAMACモジュールを制御し、それらからデータを収集してメインコンピュータに転送する、マイクロプロセッサを備えた旧式の補助クレートコントローラ(ACM)の1台は、VMEbusバイトシリアルハイウェイドライバを備えたワークステーションに置き換えられた。ワークステーションとVMEbusバイトシリアルハイウェイドライバの組み合わせは、我々のシステム内の多くのミニコンピュータを置き換えるために開発され、使用されている。デジタルリニアテープ(DLT)ライブラリを備えたワークステーションが、最終データストレージとして導入された。メインフレームコンピュータである富士通GS8300に接続されているカートリッジテープライブラリ(CTL)用の数テラバイトの生データテープの変換は、ワークステーション上でメインフレームデータを処理するために準備されたデータ変換ソフトウェアを使用して開始される予定である。