FusionPapers
図版検索AI要約wiki日本の研究装置ジャーナルChatGPTAbout
© 2026 FUSIONPAPERS
About法務情報
トップに戻る

Experimental study on the role of the target electron temperature as a key parameter linking recycling to plasma performance in JET-ILW

B. Lomanowski, M. Dunne, N. Vianello, S. Aleiferis, M. Brix, J. Canik, I.S. Carvalho, L. Frassinetti, D. Frigione, L. Garzotti2022年被引用 11Nuclear FusionIF 3出版社

Changes in global and edge plasma parameters (H98(y,2), dimensionless collisionality ν*, core density peaking, separatrix density ne,sep) with variations in the D2 fueling rate and divertor configuration are unified into a single trend when mapped to ⟨Te,ot⟩, the spatially averaged spectroscopically derived outer target electron temperature. Dedicated JET with the ITER-like wall (JET-ILW) experiments in combination with an extended JET-ILW database of unseeded low-triangularity H-mode plasmas spanning a wide range of D2 fueling rates, Ip, Bt and heating power have demonstrated the importance of ⟨Te,ot⟩ as a key physics parameter linking the recycling particle source and detachment with plasma performance. The remarkably robust H98(y,2) trend with ⟨Te,ot⟩ is connected to a strong inverse correlation between ⟨Te,ot⟩, ne,sep and ν*, thus directly linking changes in the divertor recycling moderated by ⟨Te,ot⟩ with the previously established relationship between ν*, core density peaking and core pressure resulting in a degradation in core plasma performance with decreasing ⟨Te,ot⟩ (increasing ν*). A strong inverse correlation between the separatrix to pedestal density ratio, ne,sep/ne,ped, and ⟨Te,ot⟩ is also established, with the rise in ne,sep/ne,ped saturating at ⟨Te,ot⟩ > 10 eV. A strong reduction in H98(y,2) is observed as ⟨Te,ot⟩ is driven from 30 to 10 eV via additional D2 gas fueling, while the divertor remains attached. Consequently, the pronounced performance degradation in attached divertor conditions has implications for impurity seeding radiative divertor scenarios, in which H98(y,2) is already low (∼0.7) before impurities are injected into the plasma since moderate gas fueling rates are required to promote high divertor neutral pressure. A favorable pedestal pressure, pe,ped, dependence on Ip has also been observed, with an overall increase in pe,ped at Ip = 3.4 MA as ⟨Te,ot⟩ is driven down from attached to high-recycling divertor conditions. In contrast, pe,ped is reduced with decreasing ⟨Te,ot⟩ in the lower Ip branches. Further work is needed to (i) clarify the potential role of edge opacity on the observed favorable pedestal pressure Ip scaling; as well as to (ii) project the global and edge plasma performance trends with ⟨Te,ot⟩ to reactor-scale devices to improve predictive capability of the coupling between recycling and confined plasma fueling in what are foreseen to be more opaque edge plasma conditions.

装置

jet高精度(タイトル一致)iter中精度(概要文一致)

wiki

JETRecycling
この論文にはまだAI要約がありません。

関連論文

Scaling radiative divertor solutions to high power in DIII-D

2012Nuclear Fusion

Integrated modelling of core and divertor plasmas for the DEMO Fusion Neutron Source hybrid facility

2019Nuclear Fusion

Reversed-direction 2-point modelling applied to divertor conditions in DIII-D

2024Plasma Physics and Controlled Fusion

Overview of ASDEX Upgrade results

2017Nuclear Fusion

Parameter dependencies of the separatrix density in low triangularity L-mode and H-mode JET-ILW plasmas

2023Nuclear Fusion

Studying divertor relevant plasmas in the Pilot-PSI linear plasma device: experiments versus modelling

2018Plasma Physics and Controlled Fusion

On the role of hydrogen radiation absorption in divertor plasma detachment

2019Nuclear Fusion

Impurity behaviour in JET-ILW plasmas fuelled with gas and/or with pellets: a comparative study with the transport code COREDIV

2021Nuclear Fusion

Simple relations between scrape-off layer parameters of high recycling divertors Part II: Further relations

2000Nuclear Fusion

Characteristics of electron temperature profile stiffness in electron-heated plasmas on EAST

2023Nuclear Fusion