Measurements on the D-T source and field characteristics were carried out to provide data for verifying the calculation of the source term used in subsequent analysis for Phase-II experiments of the JAERI/USDOE collaborative program on fusion blanket neutronics. Neutron flux distributions inside of the Phase-II closed system were measured by activation foils distributed on the Li2CO3 enclosure as well as on the front surface of Li2O testing zone. The multi-foil activation technique, a small sphere NE213 spectrometer, and a proton recoil counter were applied to measure the neutron spectrum on the front face of the testing zone. The results showed good symmetry of the neutron flux distribution on the surface of the test region as well as in most parts of the cavity. It was proved that the Li2CO3 enclosure with polyethylene served as a good insulator between fields inside and outside of the system.As an attempt, the neutron source position and strength were estimated utilizing the mapped activation reaction rates. Values estimated were in good agreement with the actual source position and the source strength determined by the associated a particle counting method. It was suggested that this approach based on the foil activation technique is promising for the determination of D-T source strength and mean source position in a plasma.
D-T線源と場の特性に関する測定は、その後のJAERI/USDOE核融合ブランケット中性子工学協力計画の第II相実験における解析に使用される線源項を検証するためのデータを提供するために実施された。第II相閉鎖体系内の中性子フラックス分布は、Li2CO3囲い上およびLi2O試験領域前面に配置された放射化箔によって測定された。試験領域前面における中性子スペクトルを測定するために、多箔放射化法、小型球状NE213スペクトロメータ、および陽子反跳計数管が適用された。結果は、試験領域表面およびキャビティの大部分における中性子フラックス分布の良好な対称性を示した。Li2CO3囲いとポリエチレンが、体系内外の間の優れた遮蔽体として機能することが証明された。試みとして、マッピングされた放射化反応率を利用して中性子源位置と強度が推定された。推定値は、関連するα粒子計数法によって決定された実際の線源位置および線源強度と良好な一致を示した。この箔放射化法に基づくアプローチが、プラズマ中のD-T線源強度と平均線源位置の決定に有望であることが示唆された。