AbstractIntense ion beams from an RFQ linac can be used to investigate the plasma experiments. At present, a 4He+ beam with the mean current of 2 mA in a macropulse is focused to about 1.1 mm2 on the target surface. The output-beam is switched from a beam dump to the target within 50 ns by using a fast electrostatic beam kicker. This kicker synchronizes to the RF-pulse, and it is used to control the timing between the beam-target interaction and the diagnostic equipment. The experiments were performed with a gas target. The behavior of the ion beam-produced plasma was observed.
RFQリニアックからの強力イオンビームは、プラズマの調査研究に利用することができる。現在、マクロパルス内の平均電流2 mAの4He+ビームが、ターゲット表面上の約1.1 mm²に集束される。出力ビームは、高速静電キッカーを用いてビームダンプからターゲットへ50 ns以内で切り替えられる。このキッカーはRFパルスに同期しており、ビームとターゲットの相互作用と診断装置のタイミング制御に使用される。実験はガスターダーを用いて行われた。イオンビーム生成プラズマの挙動が観測された。