In DIII-D, experiments have been performed in hydrogen plasmas to determine the requirement for hydrogen operation in ITER. The H-mode threshold power has been determined to increase with input torque for both hydrogen and deuterium plasmas with the H-mode power threshold for hydrogen plasmas being greater by approximately a factor of 2 at zero torque than in comparable deuterium plasmas. The threshold power for hydrogen discharges with full counter-current beam injection is roughly the same as the threshold power for deuterium discharges with co-current beam injection. The plasma geometry also influences the power threshold through the vertical distance between the X-point and the divertor surface.
DIII-Dにおいて、水素プラズマ中の実験が、ITERにおける水素運転の要件を決定するために実施された。Hモード閾値パワーは、水素プラズマと重水素プラズマの両方において入力トルクとともに増加することが決定された。水素プラズマのHモードパワー閾値は、ゼロトルクにおいて同等の重水素プラズマよりも約2倍大きい。完全同方向電流ビーム入射を伴う水素放電の閾値パワーは、完全逆方向電流ビーム入射を伴う重水素放電の閾値パワーとほぼ同じである。プラズマ形状も、X点とダイバータ表面との間の垂直距離を通じてパワー閾値に影響を与える。