Application of particle collector scoops in front of the pumping ducts of axisymmetric divertor/magnetic limiter configurations is proposed. These scoops should enclose a significant fraction of the recycling particles. The resulting increase in neutral particle pressure in front of the pumping ducts leads to an improved exhaust efficiency. This can permit an extension of the operational margin for density control. Alternatively, aiming at a prescribed exhaust flow in reactor-type devices such as INTOR, the pumping ducts could be reduced in aperture, leaving valuable space for other components. The lay-out of the proposed scheme depends on the heat load on the leading edge in front of the scoop and on the deflector plate in front of the pumping ducts.
軸対称ダイバータ/磁気リミター配位の排気ダクト前面への粒子捕集スクープの適用を提案する。これらのスクープは、リサイクリング粒子のかなりの割合を閉じ込めるはずである。その結果生じる排気ダクト前面の中性粒子圧力の上昇は、排気効率の改善につながる。これは、密度制御のための運転マージンの拡大を可能にし得る。あるいは、INTORのような炉型装置において所定の排気流量を目標とする場合、排気ダクトの開口部を小さくすることができ、他の構成要素のための貴重なスペースを残すことができる。提案方式のレイアウトは、スクープ前面の前縁部と排気ダクト前面のデフレクタープレートにおける熱負荷に依存する。