Modification of the sawtooth period through ion cyclotron resonance frequency (ICRF) heating and current drive has been demonstrated in a number of experiments. The effect has been seen to depend critically on the location of the ICRF absorption region with respect to the q = 1 flux surface. Consequently, for ICRF to be a viable tool for sawtooth control, one must be able to control the ICRF absorption location in real time so as to follow variations in the location of the q = 1 surface. To achieve this, the JET ICRF system has been modified to allow the JET real time central controller to control the frequency of the ICRF generators. An algorithm for real time determination of the sawtooth period has been developed and a closed loop controller, which modifies the frequency of the ICRF generators to bring the measured sawtooth period to the desired reference value, has been implemented. This paper shows the first experimental demonstration of closed loop sawtooth period control by real time variation of the ICRF wave frequency.
ICRF加熱および電流駆動による鋸歯状周期の変調は、数多くの実験で実証されている。この効果は、ICRF吸収領域の位置がq=1磁気面に対してどのような関係にあるかに決定的に依存することが確認されている。したがって、ICRFを鋸歯状制御のための有効な手段とするためには、q=1磁気面の位置の変動に追従するよう、ICRF吸収領域の位置をリアルタイムで制御できることが必要である。この目標を達成するため、JETのICRFシステムは、JETのリアルタイム中央制御装置がICRF発振器の周波数を制御できるように改造された。鋸歯状周期のリアルタイム決定アルゴリズムが開発され、測定された鋸歯状周期を目標値に一致させるようICRF発振器の周波数を調整する閉ループ制御器が実装された。本論文は、ICRF波周波数のリアルタイム変動による鋸歯状周期の閉ループ制御の初めての実験的実証を示すものである。