We have carried out precision optimization of inertial confinement fusion ignition scale implosions. We have achieved hohlraum temperatures in excess of the 300 eV ignition goal with hot-spot symmetry and shock timing near ignition specs. Using slower rise pulses to peak power and extended pulses resulted in lower hot-spot adiabat and higher main fuel areal density at about 80% of the ignition goal. Yields are within a factor of 5–6 of that required to initiate alpha dominated burn. It is likely we will require thicker shells (+15–20%) to reach ignition velocity without mixing of ablator material into the hot spot.
我々は、慣性核融合点火スケールの爆縮の精密最適化を実施した。300 eVの点火目標を超えるホーラム温度を達成し、ホットスポットの対称性と衝撃波タイミングは点火仕様に近いものであった。ピーク出力への立ち上がりを遅くし、出力持続時間を延長したパルスにより、ホットスポットの断熱圧縮度は低下し、主燃料の面密度は点火目標の約80%に達した。収量は、アルファ粒子による自己加熱を開始するために必要な値の5〜6倍以内である。点火速度に到達するには、アブレータ材料がホットスポットに混入しないよう、シェル厚を15〜20%増加させる必要があると考えられる。