Measurements of the plasma parameters have been made in the boundary layer of JET for Ohmic discharges with discrete limiters over a wide range of operating conditions. The plasma currents have been varied from 1 MA to 5 MA and the average density from 1 to 5 X 1019 m−3. It has been observed that the edge density increases with line average density and that the edge temperature decreases. Emphasis has been placed on testing data under steady state conditions of plasma current and density. The temperature and density at the last closed flux surface have been modelled using global particle and energy balance. Good quantitative agreement has been obtained with the experimental data for the density and the total particle flux. In a second stage, using the global energy balance, a crude attempt has been made to estimate the impurity influx and hence the radiation from the plasma. The results give the right order of magnitude and the correct trends for the variation of the edge temperature with density and input power.
JETの境界層におけるプラズマパラメータの測定が、ディスクリートリミターを有するオーミック放電について、広範囲の運転条件にわたって行われた。プラズマ電流は1 MAから5 MAまで、平均密度は1から5×10¹⁹ m⁻³まで変化させた。端部密度は線平均密度とともに増加し、端部温度は減少することが観測された。プラズマ電流と密度の定常状態条件下でのデータ検証に重点が置かれた。最終閉磁気面における温度と密度は、全体の粒子バランスとエネルギーバランスを用いてモデル化された。密度と全粒子束については、実験データと良好な定量的一致が得られた。第二段階として、全体のエネルギーバランスを用いて、不純物流入量、ひいてはプラズマからの放射を推定する粗い試みがなされた。結果は、端部温度の密度および入力パワーに対する変化について、正しい桁数と正しい傾向を与えるものであった。