The electron temperature and density at the edge plasma of the reversed field pinch experiment RFX are measured from the intensity ratio of selected spectral lines emitted by an atomic thermal helium beam injected into the plasma discharge. This technique, already performed in several Tokamaks, has been, for the first time, applied to a reversed field pinch to extend the edge density and temperature measurements to high-current discharges where intrusive probes cannot withstand the high-power fluxes. The temperature at the edge increases with the plasma current and decreases with the plasma average electron density. These edge values have been used to analyse the behaviour of the impurity influxes. The influence of the edge temperature and density on the efficiency of carbon penetration has been studied by means of a Monte Carlo simulation of the plasma behaviour at the edge.
逆転磁場ピンチ実験装置RFXの周辺プラズマにおける電子温度と電子密度は、プラズマ放電中に注入された原子状ヘリウムビームが放出する選択されたスペクトル線の強度比から測定される。この手法は、既に複数のトカマク装置で実施されているが、逆転磁場ピンチ装置に適用されたのは今回が初めてであり、高電流放電時における周辺密度・温度測定の範囲を拡大するものである。このような高電流放電では、挿入型プローブは高熱流束に耐えることができない。周辺部の温度はプラズマ電流とともに増加し、プラズマ平均電子密度とともに減少する。これらの周辺部の値は、不純物流入の挙動を解析するために用いられた。周辺部の温度と密度が炭素の浸透効率に及ぼす影響は、周辺プラズマの挙動に関するモンテカルロシミュレーションによって調べられた。