A stability analysis using equilibria from CORSICA transport simulations finds that the maximum stable pedestal pressure in ITER 15 MA baseline plasma is 110 kPa corresponding to a pedestal temperature of 5.9 keV. The height of the stable pedestal is robust for the assumption of the pedestal height varying only by about 10% if the width of the pedestal is varied by 30%. A conducting first wall has a stabilizing effect on the peeling–ballooning modes that limit the edge pressure. However, the stabilization is unlikely to significantly change the stability limits, but could affect the ELM dynamics by lowering the growth rate of the ELM triggering peeling–ballooning modes. The entire pedestal region is stable against n = ∞ ballooning modes for all studied pedestal temperatures. This is due to the high bootstrap current keeping the magnetic shear in the region of large pressure gradient.
CORSICA輸送シミュレーションによる平衡を用いた安定性解析により、ITER 15 MAベースライン・プラズマにおける最大安定ペデスタル圧力は110 kPaであり、これはペデスタル温度5.9 keVに相当することが見出された。安定ペデスタルの高さは、ペデスタル幅を30%変化させた場合、ペデスタル高さの変化が約10%にとどまることから、その仮定に対して頑健であることが示された。導電性第一壁は、エッジ圧力を制限するピーリング・バルーニングモードに対して安定化効果を有する。しかしながら、この安定化効果が安定性限界を有意に変化させる可能性は低く、ELMを誘発するピーリング・バルーニングモードの成長率を低下させることを通じてELMダイナミクスに影響を及ぼし得る。ペデスタル領域全体は、調査したすべてのペデスタル温度において、n = ∞バルーニングモードに対して安定である。これは、大きな圧力勾配領域において磁気シアを維持する高いブートストラップ電流によるものである。