The application of resonant magnetic perturbations (RMPs) induces striated heat fluxes on the divertor plate in tokamaks. These striated heat fluxes were previously considered strike point splitting by the intersection between the divertor and predicted magnetic lobe structures. Recently, the existence of stationary 3D filaments has been observed for the first time in National Spherical Torus Experiment (NSTX) plasmas with toroidal mode number n = 3 RMPs. Magnetic field line tracing of these filaments from the midplane to the divertor is consistent with the quantity and the radial and toroidal location of striated heat fluxes observed on the divertor. This study suggests that divertor striated heat flux patterns are linked to these stationary filaments rather than to strike point splitting or magnetic lobe structures for NSTX. This finding will help guide future efforts to understand the heat flux striations in NSTX with RMPs in order to control and reduce the divertor peak heat flux.
トカマクにおいて、共鳴磁場摂動(RMP)の印加はダイバータ板上に縞状熱流束を誘起する。これらの縞状熱流束は、これまでダイバータと予測された磁気ローブ構造との交差によるストライク点分裂であると考えられていた。最近、ナショナル球状トーラス実験装置(NSTX)のトロイダルモード数 n = 3 のRMPを有するプラズマにおいて、定常的な3次元フィラメントの存在が初めて観測された。これらのフィラメントの赤道面からダイバータまでの磁力線追跡は、ダイバータ上で観測された縞状熱流束の量ならびに径方向およびトロイダル方向の位置と一致する。本研究は、NSTXにおいてダイバータの縞状熱流束パターンが、ストライク点分裂や磁気ローブ構造ではなく、これらの定常フィラメントに関連していることを示唆する。この発見は、ダイバータのピーク熱流束を制御および低減するために、RMPを有するNSTXにおける熱流束の縞状構造を理解するための今後の取り組みに役立つであろう。