Resistive instabilities and wall stabilization of ideal kink modes with low toroidal mode number n are investigated in JT-60U reversed shear discharges. Localized burst-like MHD activity with n⩽3 is observed in the negative shear region with large pressure gradient near the internal transport barrier; this activity is identified as the resistive interchange mode.The burst-like MHD activity is benign with respect to the internal transport barrier and no clear degradation of plasma stored energy by the burst-like MHD activity is observed. The resistive interchange mode, however, results in a major collapse through non-linear coupling with a tearing mode in the positive shear region. A resistive wall mode (RWM) followed by a major collapse is observed in wall stabilized high β discharges exceeding the ideal stability limit with the wall at infinity (βN>βNno-wall).No clear continuous slowing down of the plasma toroidal rotation is observed before the growth of an RWM.
抵抗性不安定性と、低トロイダルモード数nを持つ理想キンクモードの壁安定化が、JT-60Uの反転シア放電において調査される。内部輸送障壁近傍の大きな圧力勾配を伴う負のシア領域において、n⩽3の局在したバースト状MHD活動が観測される。この活動は抵抗性インターチェンジモードと同定される。バースト状MHD活動は内部輸送障壁に対して benign であり、バースト状MHD活動によるプラズマ蓄積エネルギーの明確な劣化は観測されない。しかしながら、抵抗性インターチェンジモードは、正のシア領域におけるテアリングモードとの非線形結合を通じて、大きな崩壊を引き起こす。壁を無限遠に置いた場合の理想安定性限界を超える壁安定化高β放電において、大きな崩壊に続く抵抗性壁モード(RWM)が観測される。RWMの成長前には、プラズマトロイダル回転の明確な連続的減速は観測されない。