The parallel structure of blob filaments in the scrape-off layer of Alcator C-Mod is investigated by combining electrostatic probe measurements with localized measurements of Dα or He I line emission. The spatially resolved emission measurements were made in the outboard midplane region, while probes sampled fluctuations both close to the magnetic X-point and at the outer divertor target. Time-delay correlation analysis reveals that blobs form highly elongated filaments along the ambient magnetic field from the midplane to the divertor target. Those filaments appear to be fairly unaffected by the strong magnetic shear region close to the X-point with maximum correlation amplitudes of approximately 75% between near-midplane and near-X-point fluctuations, as well as between near-midplane and divertor-target fluctuations. However, the filaments do not form at the same time everywhere within a flux tube, but appear, on average, first nearer the midplane and show diffusion along the magnetic field. This parallel propagation occurs on a time-scale that is much faster than expected from particle diffusion, but agrees with fundamental dispersion estimates.
アルカトールCモッドのスクレイプオフ層におけるブロブフィラメントの平行構造を、静電プローブ測定とDαまたはHe I線放射の局所測定を組み合わせることにより調査した。空間分解された発光測定はアウターボード赤道面領域で行われ、一方プローブは磁気X点近傍と外側ダイバータ標的の両方で変動をサンプリングした。時間遅延相関解析により、ブロブが赤道面からダイバータ標的までの周囲磁場に沿って高度に引き伸ばされたフィラメントを形成することが明らかになった。それらのフィラメントは、X点近傍の強い磁気シア領域の影響をほとんど受けないように見え、赤道面近傍とX点近傍の変動間、ならびに赤道面近傍とダイバータ標的の変動間で、最大相関振幅は約75%である。しかしながら、フィラメントは磁束管内の至る所で同時に形成されるのではなく、平均的には赤道面に近い方で最初に現れ、磁場に沿った拡散を示す。この平行伝播は、粒子拡散から予想されるよりもはるかに速い時間スケールで発生するが、基本的な分散推定と一致する。