AbstractThe task of creation of a new generation of switches was set forth in the ITER research and development programme. The set of switches consists of circuit breakers and making switches both for normal and protective mode of operation. In addition, there may arise a demand for a polarity reverser to change the output current polarity of the supply converter. All of these switches are to operate with steady state currents of about 40 kA and voltages of up to 20 kV.The required response time is not more than several milliseconds. In this paper the results of development and investigation of several multiaction mechanical switches for the ITER power supply and protection systems are described. An extensive test programme was carried out to check the design concepts of the switches and determine their real parameters. The results of the experimental study indicated that all of these switches can be used as the basis for the design of the ITER switches.
ITER研究開発プログラムにおいて、新型スイッチ群の製作という課題が設定された。このスイッチ群は、通常動作モードおよび保護動作モードの両方における遮断器と投入開閉器から構成される。さらに、電源コンバータの出力電流極性を反転するための極性反転装置の需要が生じる可能性がある。これらのスイッチはすべて、約40 kAの定常電流と最大20 kVの電圧で動作することが要求される。必要な応答時間は数ミリ秒以内である。本論文では、ITER電源系統および保護系統用の複数の多機能機械式スイッチの開発と検証の結果について述べる。設計概念の検証と実パラメータの確定を目的として、広範な実験プログラムが実施された。実験研究の結果は、これらのスイッチがすべてITER用スイッチ設計の基礎として使用可能であることを示した。