Using energy balance arguments, the maximum power which can be lost by volume processes in a tokamak divertor has been calculated. A simple 1D model is used for parallel heat conduction in the scrape-off layer. It is shown that when radiation is added to the power balance, solutions are often thermally unstable. Conduction remains a powerful loss mechanism for plasma temperature at the target greater than or equal to 10 eV. The maximum power which can be lost by radiation or other volume processes decreases with increasing plasma density, but increases with increasing input power. It is difficult to make the fractional power radiated exceed 50% for typical divertor parameters.
エネルギー収支の議論を用いて、トカマクダイバータにおける体積過程によって失われ得る最大パワーが計算された。スクレイプオフ層における平行熱伝導には単純な1次元モデルが用いられる。パワーバランスに放射が加えられると、解はしばしば熱的に不安定になることが示される。伝導は、ターゲットにおけるプラズマ温度が10 eV以上の場合、強力な損失機構のままである。放射または他の体積過程によって失われ得る最大パワーは、プラズマ密度の増加とともに減少するが、入力パワーの増加とともに増加する。典型的なダイバータパラメータに対して、放射されるパワーの割合を50%を超えて大きくすることは困難である。