AbstractThis paper describes the measurement of D-D fusion neutrons in the toroidal stellarator plasmas on Heliotron E. We used three moderated 3He counters and a moderated BF3 counter. Calibration of neutron detectors was previously done with a 252Cf spontaneous fission neutron source. We describe the measured fusion neutron emissions with several discharge conditions with hydrogen neutral beam injection heating to the deuterium plasmas. The Heliotron E plasmas are usually initiated by electron cyclotron resonance heating at a magnetic field of 1.9 T without an ohmic heating plasma current. We have tried to deduce the central deuterium ion temperature from measured neutron flux and line-averaged electron density. We have compared the central ion temperatures by neutron flux, with the passive charge exchanged particle analyses and diamagnetic stored energy. We discuss the possible error sources for the central neutron deduced deuterium temperature.
本論文は、ヘリオトロンEにおけるトーラス型ステラレータープラズマ中のD-D核融合中性子の測定について述べる。我々は、3本の減速材付き³He計数管と1本の減速材付きBF₃計数管を使用した。中性子検出器の較正は、以前に²⁵²Cf自発核分裂中性子源を用いて実施した。我々は、水素中性粒子ビーム入射加熱を重水素プラズマに適用した際の、いくつかの放電条件における核融合中性子放出の測定結果について述べる。ヘリオトロンEのプラズマは、通常、オーム加熱プラズマ電流を伴わずに、1.9Tの磁場中での電子サイクロトロン共鳴加熱によって生成される。我々は、測定された中性子束と線平均電子密度から、中心部重水素イオン温度を推定することを試みた。我々は、中性子束から得られた中心部イオン温度を、受動的電荷交換粒子分析および反磁性蓄積エネルギーによる結果と比較した。我々は、中心部中性子から推定された重水素温度における考えられる誤差要因について議論する。