FusionPapers
図版検索トレンドwiki日本の研究
© 2026 FUSIONPAPERS
About法務情報
トップに戻る

Long pulse neutral beam injection

R.S. Hemsworth2003年被引用 15Nuclear FusionIF 3出版社

Long pulse operation has an important impact on the design and utilization of a neutral beam injection system. This paper, first describes briefly the injectors designed for ITER FEAT as they are the first to be designed for long pulse operation under conditions approaching those that will be experienced in future machines. The important consequences of long pulse operation on the injector design will be then discussed, and finally some suggestions will be made for future, continuously operating systems.

日本語訳

長時間パルス運転は、中性粒子入射システムの設計と利用に重要な影響を及ぼす。本論文では、まずITER FEAT用に設計された入射装置について簡潔に述べる。これらの入射装置は、将来の装置で経験されるであろう条件に近い条件下での長時間パルス運転用に設計された最初のものであるためである。次に、長時間パルス運転が入射装置の設計に及ぼす重要な影響について議論し、最後に、将来の連続運転システムに向けていくつかの提案を行う。

装置

iter低精度(概要文一致)

wiki

Neutral beamNeutral beam injection
この論文にはまだAI要約がありません。

関連論文

Some lessons from long pulse operation of negative ion sources and accelerators

2006Nuclear Fusion

Long pulse operation of neutral beam injector on EAST tokamak

2023Fusion Engineering and Design

Development of a plasma generator for a long pulse ion source for neutral beam injectors

2011Review of Scientific Instruments

Operational challenges for long pulses on JET-ILW

2025Plasma Physics and Controlled Fusion

Long pulse characteristics of 5 MW ion source for SST-1 neutral beam injector

2008Fusion Engineering and Design

Status of the ITER heating neutral beam system

2009Nuclear Fusion

Development of the plasma generator for a long pulse 10×40 neutral beam

1986Review of Scientific Instruments

Operation of the negative ion-based neutral beam injection system during Large Helical Device experimental campaigns

2001Fusion Engineering and Design

Design features and commissioning of pulse arc plasma source and power supply system for the VEST neutral beam injection system

2018Fusion Engineering and Design

The timing system of the ITER full size neutral beam injector prototype

2019Fusion Engineering and Design