The effects of plasma deformability on the feedback stabilization of axisymmetric modes of tokamak plasmas are studied. It is seen that plasmas with strongly shaped cross-sections have unstable motion different from a rigid shift. Furthermore, the placement of passive conductors is shown to modify the nonrigid components of the eigenfunction in a way that reduces the stabilizing eddy currents in these conductors. Passive feedback results obtained using several equilibria of varying shape and aspect ratio are presented. The eigenfunction is also modified under the effects of active feedback. This deformation is seen to depend strongly on the position of the flux loops that are used to determine the plasma vertical position for the active feedback system. The variations of these nonrigid components of the eigenfunction always serve to reduce the stabilizing effect of the active feedback system by reducing the measurable poloidal flux at the flux loop locations. Active feedback results are presented for the PBX-M tokamak configuration
トカマクプラズマの軸対称モードのフィードバック安定化に対するプラズマ変形性の影響を研究した。強く変形した断面を持つプラズマは、剛体シフトとは異なる不安定運動を示すことがわかった。さらに、受動導体の配置が固有関数の非剛体成分を修正し、これらの導体における渦電流の安定化効果を低減することを示した。様々な形状とアスペクト比を持つ複数の平衡を用いて得られた受動フィードバックの結果を示す。能動フィードバックの影響下でも固有関数は修正される。この変形は、能動フィードバックシステムのプラズマ垂直位置を決定するために使用される磁束ループの位置に強く依存することがわかった。固有関数の非剛体成分の変化は、磁束ループ位置における測定可能な磁束を低減することにより、能動フィードバックシステムの安定化効果を常に減少させる。PBX-Mトカマク配位に対する能動フィードバックの結果を示す。