AbstractSince November 1990, systematic research has been carried out in preparation for a Japanese draft of structural design guidelines for the experimental fusion reactor. This report summarizes the major results of the work and the status of these efforts. A classification of components and definition of operating conditions are proposed on the basis of the ITER-CDA design, in the light of the safety characteristics of the fusion reactor and relevant conventions for the existing fission reactor design code. Specific issues regarding the structural design of the experimental fusion reactor are discussed based on the experimental and analytical work. The validity of the existing structural design method is confirmed for the use of irradiated 316 SS, irrespective of the significant reduction in uniform elongation capability caused by heavy neutron irradiation. Further important phenomena are treated such as magnetic damping, magnetic stiffness and fracture due to electromagnetic forces. Finally, the issues concerned with welding and non-destructive examinations are discussed with relevance to component classification.
1990年11月以来、実験用核融合炉の構造設計指針の日本案を作成するための体系的な研究が実施されてきた。本報告書は、その研究の主要な成果と現状をまとめたものである。機器の分類と運転条件の定義は、ITER-CDA設計に基づいて提案されており、核融合炉の安全特性と既存の核分裂炉設計コードに関する関連する慣行を考慮している。実験用核融合炉の構造上の課題に関する具体的な問題は、実験的および解析的研究に基づいて議論されている。既存の構造設計手法の妥当性は、重中性子照射による一様伸び能力の大幅な低下にもかかわらず、照射済み316ステンレス鋼の使用に関して確認されている。さらに、磁気減衰、磁気剛性、電磁力による破壊などの重要な現象が扱われている。最後に、溶接および非破壊検査に関する問題が、機器分類との関連で議論されている。