The plasma movement in the upward direction (away from the X-point) after the thermal quench (TQ) of major disruptions in ITER is favourable for the machine design, since the downward movement causes larger electromagnetic (EM) load due to the induced eddy and halo currents. Vertical directions of plasma movement after the TQ in ITER are investigated using the predictive mode of the DINA code. Three dominant parameters in determining the direction of plasma movement are identified: (i) the rate of plasma current quench (plasma temperature after the TQ), (ii) the width of plasma current mixing area just after the TQ (change of the internal plasma inductance li) and (iii) the initial vertical position of plasma column before the TQ. It is shown that the reference ITER plasma moves upwards after the TQ, if the electron temperature after the TQ is less than 10 eV and the drop of li does not exceed 0.2 for the present reference initial vertical position (55.5 cm above the centre of the machine). It is also shown that the operational domain leading to the upward movement is considerably large for disruptions with fast current quench, which could generate quite severe EM load due to the induced eddy current combined with the induced halo current if the movement is downwards.
Optimization of plasma initiation in the ITER Tokamak