Measuring the value of the safety factor (q) in the core during sawtooth cycles is still an open issue. A new method to measure q in Tore Supra plasma core is presented here. It relies on the analysis of the time evolution of a set of MHD modes detected after the sawtooth crashes. These modes are in the frequency range of previously observed Beta-induced Alfvén Eigenmodes, but with a frequency declining in time. The mode frequency analysis shows that the q profile is reversed when we have ICRH, after the sawtooth crash. In high current discharges ( MA), the q-profile remains reversed for a longer time compared with lower plasma current discharges. Non-linear 3D MHD simulations of sawteeth performed with the XTOR-2F code (Lütjens and Luciani 2010 J. Comput. Phys. 229 8130–43) exhibit features that are similar to these observations.
核融合プラズマの中心部におけるセーフティファクター(q)の値を鋸歯状振動サイクル中に測定することは、依然として未解決の問題である。本論文では、Tore Supraプラズマ中心部におけるqを測定する新しい方法を提示する。この方法は、鋸歯状振動クラッシュ後に検出される一連のMHDモードの時間発展の解析に基づいている。これらのモードは、これまでに観測されたベータ誘起アルヴェン固有モードの周波数範囲にあるが、その周波数は時間とともに減少する。モード周波数解析により、ICRH印加時には鋸歯状振動クラッシュ後にqプロファイルが反転していることが示される。高電流放電(MA)では、qプロファイルは低いプラズマ電流の放電と比較して、より長い時間反転した状態を維持する。XTOR-2Fコード(Lütjens and Luciani 2010 J. Comput. Phys. 229 8130–43)を用いて行った鋸歯状振動の非線形3D MHDシミュレーションは、これらの観測結果と類似した特徴を示す。