The behaviour of the FTU tokamak plasma has been analysed by using two reconstructive MHD equilibrium codes: the first code works by using the magnetic data alone and the second one by including as well the shape of the kinetic pressure profile, as obtained from the measured profiles of electron temperature Te and density ne. The code that analyses the magnetic data alone provides a good evaluation of the macroscopic quantities such as the poloidal beta βp and the internal inductance li, if the plasma elongation is greater than 1.04. No detailed information about the toroidal current density profile Jϕ and the safety factor profile q can be obtained from the magnetic data alone. On the other hand, the coupling of magnetic and kinetic data is able to provide a reasonable estimate of the toroidal current density profile and of its behaviour during the plasma discharge. The reliability of the Jϕ and q profile reconstruction has been explored and validated by a detailed comparison with the observed MHD behaviour of the FTU plasma discharges. A good agreement between the appearance of the sawtooth activity and the drop of the safety factor on the magnetic axis go to unity is observed. Also, at least for edge safety factors qψ less than 4, the sawtooth inversion radius is found to be very close to the q=1 surface. A remarkable correspondence between Jϕ and Te3/2 is found in sawtoothing discharges. The structure of the snake oscillation in pellet injected discharges is found to be strictly correlated to the position of the q=1 surface. A cylindrical linear tearing mode stability calculation applied to the reconstructed Jϕ profile has shown qualitative agreement with the appearance of the Mirnov oscillations. Finally, the magnetic reconnections between double resonant surfaces during the rise of the plasma current or after the pellet injection have provided an interesting validation of the Jϕ profile reconstruction
FTUトカマクプラズマの挙動は、2つの再構成MHD平衡コードを用いて解析された。第1のコードは磁気データのみを使用し、第2のコードは電子温度Teと密度neの測定プロファイルから得られた運動論的压力プロファイルの形状も含めて使用する。磁気データのみを解析するコードは、プラズマ伸長率が1.04より大きい場合、ポロイダルベータβpや内部インダクタンスliなどの巨視的量の良好な評価を提供する。トロイダル電流密度プロファイルJϕと安全係数プロファイルqに関する詳細な情報は、磁気データのみからは得られない。一方、磁気データと運動論的データの結合は、トロイダル電流密度プロファイルとそのプラズマ放電中の挙動の合理的な推定を提供することができる。Jϕおよびqプロファイル再構成の信頼性は、FTUプラズマ放電の観測されたMHD挙動との詳細な比較によって検討され、検証された。鋸歯状振動活動の出現と磁気軸上の安全係数の1への低下との間には良好な一致が観測される。また、少なくとも端部安全係数qψが4未満の場合、鋸歯状振動の反転半径はq=1面に非常に近いことが見出された。鋸歯状振動放電においては、JϕとTe3/2の間に顕著な対応関係が見られる。ペレット入射放電におけるスネーク振動の構造は、q=1面の位置と厳密に相関していることが見出された。再構成されたJϕプロファイルに適用された円筒線形ティアリングモード安定性計算は、ミルノフ振動の出現と定性的に一致することを示した。最後に、プラズマ電流の立ち上がり中またはペレット入射後の二重共鳴面間の磁気リコネクションは、Jϕプロファイル再構成の興味深い検証を提供した。