Off-axis heating experiments have been conducted in DIII-D using 75 keV neutral beam injection as the auxiliary power source. The application of 7.5 MW of deuterium neutral beam power resulted in the plasma transiting into the high density H-mode confinement regime with equal electron and ion temperatures. The global thermal energy confinement was not affected by changing the heating location. A power balance analysis employing the 11/2-D ONETWO transport code and assuming purely diffusive heat transport found that the one-fluid effective diffusivity changed dramatically between the two cases. These results indicate the possibility that the local diffusivity is a function of some quantity other than the density, temperature and their gradients. An alternative explanation is that the diffusivity remains unchanged and that there is an inward non-diffusive heat flow to balance the power flow
DIII-Dにおいて、75keVの中性粒子ビーム入射を補助加熱源として用いたオフアクシス加熱実験が実施された。7.5MWの重水素中性粒子ビーム出力の印加により、プラズマは電子温度とイオン温度が等しい高密度Hモード閉じ込め領域へ遷移した。全体の熱エネルギー閉じ込めは、加熱位置を変更しても影響を受けなかった。11/2次元ONETEC輸送コードを用い、純粋に拡散的な熱輸送を仮定したパワーバランス解析により、1流体実効拡散係数が2つのケース間で劇的に変化することが見出された。これらの結果は、局所拡散係数が密度、温度、およびそれらの勾配以外の何らかの量の関数である可能性を示している。別の説明としては、拡散係数は不変のままであり、パワーフローと釣り合う内向きの非拡散熱流が存在するというものである。