This paper examines the effect of grid resolution on the solution of a B2-EIRENE simulation of a partially detached ITER divertor plasma. Due to the large amount of required computational time in coupled finite-volume/Monte-Carlo codes, simulations of the plasma edge are typically run on coarse grids. However, new averaging techniques make simulations with finer grids feasible. Starting from the original numerical grid, simulations are performed on two successively finer grids. Results of the numerical error analysis reveal that the discretization errors are large. Peak values are particularly sensitive to grid resolution and can increase more than for the same model input parameters. However, this effect is partially offset by a modification of the operational space of the ITER divertor in this case. By choosing the numerical parameters more adequately, a total numerical error of only has been achieved within a feasible computational time.
本論文では、部分的にデタッチしたITERダイバータプラズマのB2-EIRENEシミュレーションの解に対する格子解像度の影響を調査する。結合有限体積/モンテカルロコードでは必要な計算時間が大きいため、プラズマ端部のシミュレーションは通常、粗い格子で実行される。しかし、新しい平均化手法により、より細かい格子でのシミュレーションが可能になる。元の数値格子から出発して、連続してより細かい2つの格子でシミュレーションを実行する。数値誤差解析の結果は、離散化誤差が大きいことを明らかにする。ピーク値は特に格子解像度に敏感であり、同じモデル入力パラメータに対して 以上増加し得る。しかしながら、この効果は、この場合のITERダイバータの運転空間の修正によって部分的に相殺される。数値パラメータをより適切に選択することにより、実行可能な計算時間内でわずか の総数値誤差が達成された。