Active feedback control for regulation of the safety factor (q) profile at the start of the high stored energy phase of an advanced tokamak discharge has been demonstrated in the DIII-D tokamak. The time evolution of the on-axis or minimum value of q is controlled during and just following the period of ramp-up of the plasma current using electron heating to modify the rate of relaxation of the current profile. In L-mode and H-mode discharges, feedback control of q is effective with the appropriate choice of either off-axis electron cyclotron heating or neutral beam heating as the actuator. The q profile is calculated in real time from a complete equilibrium reconstruction fitted to external magnetic field and flux measurements and internal poloidal field measurements from the motional Stark effect diagnostic.
DIII-Dトカマクにおいて、先進トカマク放電の高蓄積エネルギー相開始時における安全係数(q)分布の調整のための能動フィードバック制御が実証された。qのオン軸値または最小値の時間発展は、電流分布の緩和速度を変更するために電子加熱を用いて、プラズマ電流の立ち上げ中およびその直後に制御された。LモードおよびHモード放電において、qのフィードバック制御は、アクチュエータとしてオフ軸電子サイクロトロン加熱または中性粒子ビーム加熱のいずれかを適切に選択することにより有効である。q分布は、外部磁場・磁束測定とモーション・スターク効果計測による内部ポロイダル磁場測定に適合させた完全な平衡再構成からリアルタイムに計算される。