Modeling of impurity-seeded plasma in Large Helical Device is presented for the first time by using the three-dimensional transport code EMC3-EIRENE. High and low recycling coefficients for impurity ions are assumed to include low and high absorption rates on wall surfaces due to low and high chemical activity of neon and nitrogen, respectively. Radiation power measured by two bolometer systems and particle flux measured by divertor probes installed in multiple toroidal sections are utilized to determine impurity amount in the plasma. The toroidal uniformity and the non-uniformity of a divertor flux reduction observed experimentally for neon and nitrogen seeding, respectively, are reproduced by the model. Validations by measurements and deviations between the model and the experiment are discussed.
大型ヘリカル装置における不純物入射プラズマのモデリングを、三次元輸送コードEMC3-EIRENEを用いて初めて提示する。不純物イオンに対して高いリサイクリング係数と低いリサイクリング係数を仮定し、それぞれネオンと窒素の壁面における高い化学吸着率と低い化学吸着率を含める。2つのボロメータシステムと複数のトロイダル断面に設置されたダイバータプローブによって測定された放射パワーと粒子束を用いて、プラズマ中の不純物量を決定する。実験的に観測された、ネオン入射時のダイバータフラックス低減のトロイダル方向の一様性と、窒素入射時の非一様性が、モデルによって再現される。測定による検証と、モデルと実験の間の偏差について議論する。