The possibility of fuelling pure RF-powered tandem mirror end plugs by gas puffing is considered. It is shown experimentally that gas puffing can lead to significant increases in plug density and that the details of the plug density buildup depended on the antenna locations relative to the central cell and the plug midplane. Large charge-exchange energy loss resulting from the puff gas makes it an inefficient technique for fuelling high-temperature end plugs. The possibility of employing gas puffing for building up high-density end plugs composed of relatively cold ions is also considered as a means of achieving electrostatic confinement for an ICRF-stabilized central cell. Experimental enhancement of the central-cell density, which shows no significant cooling of the central cell by the colder plug plasmas, is demonstrated. The RF power requirements for refuelling an ICRF-powered end plug to a given density and temperature are estimated.
ガスパフによる純粋なRF駆動タンデムミラー端部プラグの燃料供給の可能性が検討されている。ガスパフがプラグ密度の有意な増加をもたらし得ること、およびプラグ密度増加の詳細が中央セルおよびプラグ中間面に対するアンテナ位置に依存することが実験的に示されている。パフガスに起因する大きな荷電交換エネルギー損失により、高温端部プラグへの燃料供給手法としては非効率的である。比較的低温のイオンからなる高密度端部プラグを構築するためのガスパフの利用可能性も、ICRF安定化中央セルの静電閉じ込めを達成する手段として検討されている。低温プラグプラズマによる中央セルの有意な冷却を伴わない中央セル密度の実験的な増強が実証されている。所定の密度および温度までICRF駆動端部プラグを再燃料供給するためのRFパワー要件が推定されている。