Heat wave propagation experiments have been carried out on the Wendelstein 7-AS stellarator. The deposition of electron cyclotron resonance heating power is highly localized in the plasma centre, so that power modulation produces heat waves which propagate away from the deposition volume. Radiometry of the electron cyclotron emission is used to measure the generated temperature perturbation. The propagation time delay of the temperature perturbation as a function of distance to the power deposition region is used to determine the electron thermal conductivity χe. This value is then compared with the value determined by global power balance. In contrast to sawtooth propagation experiments in tokamaks, it is found that the value of χe from heat wave propagation is comparable to that calculated by power balance. In addition, inward propagating waves were produced by choosing a power deposition region away from the plasma centre. Experiments were carried out at 70 GHz in the ordinary mode and at 140 GHz in the extraordinary mode. Variations of the modulation power amplitude have demonstrated that the inferred value of χe is independent of the amplitude of the induced temperature perturbations
Wendelstein 7-ASステラレーターにおいて、熱波伝播実験が実施された。電子サイクロトロン共鳴加熱パワーの堆積はプラズマ中心部に高度に局在しているため、パワー変調により、堆積領域から伝播する熱波が生成される。電子サイクロトロン放射の放射測定を用いて、生成された温度摂動が測定される。パワー堆積領域までの距離の関数としての温度摂動の伝播遅延時間を用いて、電子熱伝導率χeが決定される。この値は、その後、全体のパワーバランスによって決定された値と比較される。トカマクにおけるソーヒトン伝播実験とは対照的に、熱波伝播から得られたχeの値は、パワーバランスによって計算された値と同等であることが見出された。さらに、プラズマ中心部から離れたパワー堆積領域を選択することにより、内向きに伝播する波が生成された。実験は、70GHzの通常モードおよび140GHzの異常モードで実施された。変調パワー振幅の変化により、推定されたχeの値が、誘起された温度摂動の振幅に依存しないことが実証された。