Tearing modes are a major concern for large tokamak devices. Therefore their detection and characterization is of importance for timely countermeasures to avoid significant impact on the discharge or at least prevent possible machine damage. In case of phase-locked tearing modes, the poloidal variation of induced magnetic field fluctuation depends on the amplitudes of and the phase difference between the individual modes. This affects mode detection and identification when not considered appropriately. The phase between phase-locked (2, 1) and (3, 1) tearing modes in ASDEX Upgrade has been determined from local electron temperature and magnetic measurements independently. It is shown that the modes can be in phase at any poloidal position starting from the low field side plasma midplane over the plasma top to the high field side midplane. This observation invalidates the widespread assumption that phase-locked tearing modes are in phase near the low field side midplane. Dependence of the in-phase position on both, the plasma pressure and the plasma rotation velocity, is observed.
ティアリングモードは、大型トカマク装置にとって主要な懸念事項である。したがって、その検出と特性評価は、放電への重大な影響を回避するための適時な対策、あるいは少なくとも装置の損傷を防ぐために重要である。位相ロックされたティアリングモードの場合、誘起された磁場変動のポロイダル方向の変化は、個々のモードの振幅とそれらの間の位相差に依存する。これは、適切に考慮されない場合、モード検出に影響を及ぼす。ASDEX Upgradeにおける位相ロックされた(2,1)モードと(3,1)モードの間の位相は、局所電子温度測定と磁気測定から独立に決定された。モードは、低磁場側のプラズマ赤道面からプラズマ頂部を経て高磁場側の赤道面に至るまで、任意のポロイダル位置で同相になり得ることが示された。この観測結果は、位相ロックされたティアリングモードが低磁場側の赤道面付近で同相であるという広く受け入れられている仮定を覆すものである。同相となる位置が、プラズマ圧力とプラズマ回転速度の両方に依存することが観測された。