Vertical stability and control are examined for a tokamak configuration intended to be a generic representation of next step devices. Vertical stability calculations show that a critical resistive wall location can be determined for realistic structures and that the introduction of small amounts of low resistivity material to an all steel structure can significantly reduce the vertical instability growth rate. Vertical control simulations show that internal control coils require significantly less feedback power than external coils, and that low resistivity materials can allow either very low feedback powers or the coils to be located externally with reasonable feedback powers.
垂直安定性と制御について、次世代装置の一般的な表現を意図したトカマク配位に対して検討する。垂直安定性の計算により、臨界抵抗性壁位置が現実的な構造に対して決定可能であり、全鋼構造に低抵抗率材料を少量導入することで、垂直不安定性成長率を有意に低減できることが示される。垂直制御シミュレーションにより、内部制御コイルは外部コイルよりも著しく少ないフィードバック電力を必要とすること、また低抵抗率材料により、極めて低いフィードバック電力が可能になるか、あるいはコイルを外部に配置しても合理的なフィードバック電力で済むことが示される。