The dependence of the measured damping rate (γ/ω) on the value of the safety factor on axis (q0) and of the toroidal rotation shear has been experimentally determined for n = 1 toroidal Alfvén eigenmodes (TAEs) in JET limiter plasmas with a monotonic safety factor profile and low edge magnetic shear. For q0 < 1, the n = 1 TAE damping rate can reach values up to γ/ω > 8%, whereas for q0 > 1.1, γ/ω < 2% for similar experimental conditions. The existence of these two separate regimes is suggestive of a possible role of the sawteeth on the damping of low-n TAEs, for example, via a redistribution of the core plasma current, which would, in turn, affect the magnetic shear profile. The value of the toroidal rotation shear affects the n = 1 TAE damping rate only at high neutral beam injection power (PNBI): for PNBI > 6.5 MW we find that γ/ω > 2% in plasmas with a higher rotation shear, whereas for lower PNBI we do not observe any appreciable effect of the rotation shear on the damping rate. These observations indicate that different damping mechanisms for low-n TAEs may be active at low and high performance.
測定された減衰率(γ/ω)の、軸上の安全係数(q0)およびトロイダル回転シアの値への依存性は、単調な安全係数分布と低い周辺磁気シアを持つJETリミタープラズマにおいて、n = 1トロイダルアルフヴェン固有モード(TAE)について実験的に決定された。q0 < 1の場合、n = 1 TAEの減衰率はγ/ω > 8%までの値に達し得るが、q0 > 1.1の場合、同様の実験条件ではγ/ω < 2%である。これら二つの別個の領域の存在は、低次のnを持つTAEの減衰に対する鋸歯状振動の可能な役割、例えば、コアプラズマ電流の再分布を介した、ひいては磁気シア分布に影響を与える役割を示唆している。トロイダル回転シアの値は、高い中性粒子ビーム入射パワー(PNBI)においてのみn = 1 TAEの減衰率に影響を与える: PNBI > 6.5 MWでは、より高い回転シアを持つプラズマにおいてγ/ω > 2%であるが、より低いPNBIでは、減衰率に対する回転シアの顕著な影響は観察されない。これらの観察結果は、低次のnを持つTAEに対して、低性能時と高性能時で異なる減衰メカニズムが働いている可能性を示している。