An m=3/n=l locked mode has been observed in JT-60 at safety factors slightly below three during the current ramp-up phase of high plasma current discharges. The locked mode grows suddenly and there is no Mirnov oscillation just before the onset of this mode. The maximum plasma current of Ohmic discharges is restricted to approximately 2.4 — 2.45 MA by disruptions, which are preceded by a large m=3/n=l locked mode. The locked mode is stabilized by high power neutral beam injection. The stabilizing effect depends on neutral beam heating power, plasma density, plasma current ramp-up rate and divertor/limiter configuration.
m=3/n=1のロックトモードが、高プラズマ電流放電の電流立ち上げ位相において、安全係数が3よりわずかに小さい状態でJT-60にて観測された。このロックトモードは急激に成長し、このモードの発生直前にミルノフ振動は観測されない。オーミック放電の最大プラズマ電流は、大きなm=3/n=1ロックトモードが先行するディスラプションにより、約2.4〜2.45 MAに制限される。このロックトモードは、高出力中性粒子ビーム入射により安定化される。この安定化効果は、中性粒子ビーム加熱パワー、プラズマ密度、プラズマ電流立ち上げ率、およびダイバータ/リミター配位に依存する。