The detachment cliff is a bifurcative transition to partial detachment recently discovered at the DIII-D tokamak (McLean et al 2015 J. Nucl. Mater.463 533–6). This work presents a database analysis of target parameters in L-mode and H-mode discharges to search for a detachment cliff at ASDEX Upgrade (AUG). Most of the transitions from attached to partially detached divertor conditions observed in H- and L-mode discharges in AUG show bifurcative-like characteristics that are consistent with the properties of the detachment cliff if the drift is directed towards the active X-point. In the operational space of power and density, the bifurcative transitions identified during an L-mode discharge occur at injected power and density higher than a threshold value ( > 0.7 MW and ne > 1.6 × 10m−3, respectively). Furthermore, the temperatures at which the transitions start are found to be insensitive to the injected impurity, the injected power and the value of the upstream density. Finally, the study of the evolution of the target parameters, of the intensity of the line and of specific manometers and bolometer lines of sights shows that the physical process underlying the detachment cliff and the self-sustained divertor oscillations (Heinrich 2020 Nucl. Fusion60 076013) might be the same.
デタッチメントクリフは、最近DIII-Dトカマクで発見された部分デタッチメントへの分岐的遷移である (McLean et al 2015 J. Nucl. Mater.463 533–6)。本研究は、ASDEX Upgrade (AUG) におけるデタッチメントクリフを探索するために、LモードおよびHモード放電におけるターゲットパラメータのデータベース解析を示す。AUGのHモードおよびLモード放電で観測された、付着状態から部分デタッチメントのダイバータ状態への遷移の大部分は、 ドリフトが活性X点方向に向いている場合に、デタッチメントクリフの特性と一致する分岐様の特性を示す。パワーと密度の操作空間において、Lモード放電中に同定された分岐的遷移は、閾値よりも高い注入パワーと密度で発生する (それぞれ > 0.7 MW および ne > 1.6 × 10m−3)。さらに、遷移が始まる温度は、注入不純物、注入パワー、および上流密度の値に対して鈍感であることが見出された。最後に、ターゲットパラメータの時間発展、 線の強度、および特定のマノメータとボロメータの視線の研究は、デタッチメントクリフと自励的なダイバータ振動 (Heinrich 2020 Nucl. Fusion60 076013) の根底にある物理過程が同じである可能性があることを示している。