ITER

Cadarash, France

ITER (""The Way"" in Latin) is one of the most ambitious energy projects in the world today.

公式サイト

トピックキーワード

#核融合184#ITER163#トカマク79#ダイバータ51#プラズマ物理48#JET28#タングステン26#核融合炉25#EAST20#DIII-D19

装置分析

ジャーナル別論文数

FED

PPCF

POP

RSI

年別論文数推移

高精度マッチ高精度50件

Advanced fuelling system for ITER

Roger RamanFusion Engineering and Design2008

高精度タイトル一致

The development of standard operating procedures for the SDS of the ITER tritium plant

Kyu-Min Song, Soon Hwan Sohn, Yang Geun Chung, Seungyon Cho, Hiroshi YoshidaFusion Engineering and Design2008

高精度タイトル一致

Engineering design and R&D of Impurity Influx Monitor (divertor) for ITER

Hiroaki Ogawa, Tatsuo Sugie, Satoshi Kasai, Atsushi Katsunuma, Yoshinori KusamaFusion Engineering and Design2008

高精度

信頼度別論文数

高精度

3,677

低精度

786

中精度

1,370

Accuracy assessment of the in-bed calorimetry employed in ITER SDS

Eun-Seok Lee, Seungyon Cho, Mu-Young Ahn, Duck Hoi Kim, Hiroshi YoshidaFusion Engineering and Design2008

高精度タイトル一致

Heat analysis on the initial reference design of ZrCo hydride beds for ITER

M. Shim, H. Chung, K. Kim, H. Yoshida, M. AhnFusion Engineering and Design2008

高精度タイトル一致

Technical issues of reduced activation ferritic/martensitic steels for fabrication of ITER test blanket modules

H. Tanigawa, T. Hirose, K. Shiba, R. Kasada, S.J. ZinkleFusion Engineering and Design2008

高精度タイトル一致

Short-term tests on unidirectional fiberglass for ITER pre-compression rings

Claudio Nardi, Carmela Annino, Livio BettinaliFusion Engineering and Design2008

高精度タイトル一致

Effect of cooling rate on mechanical properties of aged ITER-grade CuCrZr

Jeong-Yong Park, Jung-Suk Lee, Byung-Kwon Choi, Bong Guen Hong, Yong Hwan JeongFusion Engineering and Design2008

高精度タイトル一致

Microstructure investigation of bronze/steel brazed joints proposed for HHF components of ITER manufacturing

G.M. Kalinin, N.S. Krestnikov, Yu.L. Jarovinskiy, I.D. Makhin, V.B. ZolotarevFusion Engineering and Design2008

高精度タイトル一致

Design progress of the vacuum vessel sectors and ports towards the ITER construction

Yu. Utin, K. Ioki, Ch. Bachmann, V. Barabash, G. SannazzaroFusion Engineering and Design2008

高精度タイトル一致

Recent progress of ITER vacuum vessel related design activities in Korea

B.C. Kim, J.W. Sa, W. Chung, N.I. Her, T.S. KimFusion Engineering and Design2008

高精度タイトル一致

A proposal of ITER vacuum vessel fabrication specification and results of the full-scale partial mock-up test

M. Nakahira, N. Takeda, S. Kakudate, M. OnozukaFusion Engineering and Design2008

高精度タイトル一致

Design of the ITER tokamak assembly tools

Hyunki Park, Jaehyuk Lee, Taehyung Kim, Yunju Song, Ki-Jung JungFusion Engineering and Design2008

高精度タイトル一致

A study on the thermal analyses of the ITER vacuum vessel thermal shield

W. Chung, B.C. Kim, J.W. Sa, D.H. Lee, K.J. JungFusion Engineering and Design2008

高精度タイトル一致

A conceptual design of the ITER upper port plug structure and its cooling channels

S.I. Pak, H.G. Lee, K.J. Jung, C.I. Walker, K.S. ChoiFusion Engineering and Design2008

高精度タイトル一致

The ITER TF coil ripple: Evaluation of ripple attenuation using Fe insert and of ripple enhancement produced by TBM

A. Portone, M. Roccella, R. Roccella, F. Lucca, G. RamogidaFusion Engineering and Design2008

高精度タイトル一致

Progress in neutronics for the ITER ECRH launcher

Arkady Serikov, Ulrich Fischer, Roland Heidinger, Klaus Kleefeldt, Haileyesus Tsige-TamiratFusion Engineering and Design2008

高精度タイトル一致

Depletion analysis of a solid-type blanket design for ITER

Sunghwan Yun, Nam Zin Cho, Mu-Young Ahn, Seungyon ChoFusion Engineering and Design2008

高精度タイトル一致

Neutronics analysis of the international thermonuclear experimental reactor (ITER) MCNP “Benchmark CAD Model” with the ATTILA discrete ordinance code

Mahmoud Z. Youssef, Russell Feder, Ian M. DavisFusion Engineering and Design2008

高精度タイトル一致

Failure Mode and Effect Analysis for remote handling transfer systems of ITER

T. Pinna, R. Caporali, A. TesiniFusion Engineering and Design2008

高精度タイトル一致

D-T neutron streaming experiment simulating narrow gaps in ITER equatorial port

K. Ochiai, S. Sato, M. Wada, H. Iida, C. KonnoFusion Engineering and Design2008

高精度タイトル一致

Biological hazard issues from potential releases of tritiated dust from ITER

L. Di Pace, E. Letellier, H. Maubert, B. Patel, W. RaskobFusion Engineering and Design2008

高精度タイトル一致

Activation and afterheat analyses for the HCPB test blanket module in ITER

P. Pereslavtsev, U. FischerFusion Engineering and Design2008

高精度タイトル一致

Assessment of the activation, decay heat, and waste disposal of the US helium-cooled ceramic breeder test blanket module in ITER

Mahmoud Z. Youssef, Alice YingFusion Engineering and Design2008

高精度タイトル一致

Use of McCad for the conversion of ITER CAD data to MCNP geometry

H. Tsige-Tamirat, U. Fischer, A. Serikov, S. StickelFusion Engineering and Design2008

高精度タイトル一致

MHD and heat transfer considerations for the US DCLL blanket for DEMO and ITER TBM

Sergey Smolentsev, Neil B. Morley, Clement Wong, Mohamed AbdouFusion Engineering and Design2008

高精度タイトル一致

Contamination of ITER core by impurities of tungsten and carbon

I.S. Landman, G. JaneschitzFusion Engineering and Design2008

高精度タイトル一致

Development of an ITER relevant inspection robot

Laurent Gargiulo, Pascal Bayetti, Vincent Bruno, Jean-Jacques Cordier, Yann PerrotFusion Engineering and Design2008

高精度タイトル一致

Development of a virtual reality simulator for the ITER blanket remote handling system

Nobukazu Takeda, Satoshi Kakudate, Masataka Nakahira, Kiyoshi Shibanuma, Alessandro TesiniFusion Engineering and Design2008

高精度タイトル一致

Progress of R&D and design of blanket remote handling equipment for ITER

S. Kakudate, N. Takeda, M. Nakahira, Y. Matsumoto, A. TesiniFusion Engineering and Design2008

高精度タイトル一致

Design of the integration interface between the EU HCPB TBM and the ITER TBM port plug including operations for connection

H. Neuberger, L.V. Boccaccini, T. Ihli, R. Roccella, O. BedeFusion Engineering and Design2008

高精度タイトル一致

Test blanket module maintenance operations between port plug and ancillary equipment unit in ITER

O. Bede, I.G. Kiss, H. Neuberger, A. Piros, J. RecskiFusion Engineering and Design2008

高精度タイトル一致

The alternative design concept for the ion source power supply of the ITER neutral beam injector

E. Gaio, V. Toigo, A. De Lorenzi, R. Piovan, L. ZanottoFusion Engineering and Design2008

高精度タイトル一致

The status of the ITER CODAC conceptual design

J.B. Lister, J.W. Farthing, M. Greenwald, I. YonekawaFusion Engineering and Design2008

高精度タイトル一致

DIII-D Integrated plasma control solutions for ITER and next-generation tokamaks

D.A. Humphreys, J.R. Ferron, A.W. Hyatt, R.J. La Haye, Y. InFusion Engineering and Design2008

高精度タイトル一致

Synchronous Databus Network in ITER: Open source real-time network for the next nuclear fusion experiment

L. Boncagni, C. Centioli, F. Iannone, C. Neri, L. ZaccarianFusion Engineering and Design2008

高精度タイトル一致

A vision for a collaborative control room for ITER

D.P. SchisselFusion Engineering and Design2008

高精度タイトル一致

Matlab modeling of ITER CODAC

L. Pangione, J.B. ListerFusion Engineering and Design2008

高精度タイトル一致

ITER shape controller and transport simulations

T.A. Casper, W.H. Meyer, L.D. Pearlstein, A. PortoneFusion Engineering and Design2008

高精度タイトル一致

A sub-modeling approach for the electromechanical disruption analysis of the ITER ICH antenna

P. Testoni, A. Fanni, P. SonatoFusion Engineering and Design2008

高精度タイトル一致

Three-dimensional Monte Carlo neutronic calculations of China ITER HCSB-TBM

J.R. Han, Y.X. Chen, S.H. Yang, X.B. Ma, K.M. FengFusion Engineering and Design2008

高精度タイトル一致

ITER vacuum vessel, in-vessel components and plasma facing materials

K. Ioki, V. Barabash, J. Cordier, M. Enoeda, J. YuFusion Engineering and Design2008

高精度タイトル一致

Completion of the KSTAR construction and its role as ITER pilot device

Yeong-Kook Oh, H.L. Yang, Y.S. Kim, K.R. Park, G.S. LeeFusion Engineering and Design2008

高精度タイトル一致

The ITER remote maintenance system

A. Tesini, J. PalmerFusion Engineering and Design2008

高精度タイトル一致

The integration of TBM systems in ITER

V.A. Chuyanov, L.M. Giancarli, S.C. Kim, C.P.C. WongFusion Engineering and Design2008

高精度タイトル一致

Neutronics and nuclear data issues in ITER and their validation

P. Batistoni, U. Fischer, K. Ochiai, L. Petrizzi, M. YoussefFusion Engineering and Design2008

高精度タイトル一致

Japanese perspective of fusion nuclear technology from ITER to DEMO

Satoru Tanaka, Hideyuki TakatsuFusion Engineering and Design2008

高精度タイトル一致

A strategic plan of Korea for developing fusion energy beyond ITER

M. Kwon, Y.S. Na, J.H. Han, S. Cho, H.T. SeoFusion Engineering and Design2008

高精度タイトル一致

Fuel cycle design for ITER and its extrapolation to DEMO

Satoshi Konishi, Manfred Glugla, Takumi HayashiFusion Engineering and Design2008

高精度タイトル一致

Plasma control systems relevant to ITER and fusion power plants

K. Kurihara, J.B. Lister, D.A. Humphreys, J.R. Ferron, P. MoreauFusion Engineering and Design2008

高精度タイトル一致

ITER

トピックキーワード

装置分析

ジャーナル別論文数

年別論文数推移

高精度マッチ高精度50件

信頼度別論文数

最新論文