The soft x-ray diagnostic system of Alcator C-Mod, equipped with 152 detectors distributed in four arrays, is used to obtain iso-emissivity surfaces. These surfaces have been characterized by giving their elongation and relative shift from the centre of the tokamak as functions of plasma radius. Flux surfaces, provided by magnetic diagnostics, have also been described with elongation and shift. Results from the comparison of the two sets of geometric parameters obtained from magnetic and x-ray diagnostics are presented. We find that, whereas the shifts obtained from these two diagnostic methods are always in good agreement, the corresponding elongation curves show different patterns. An agreement between elongations better than 2% is only found in a range of about 2 cm in minor radius. On the other hand, the elongations can differ by 10% towards the plasma edge and the plasma centre. Error bars for the x-ray diagnostic are obtained by propagating the effect of random errors at the detector signals, and can amount to of the estimated values near the edge and the centre of the plasma. The estimated uncertainties in the determination of elongation from magnetic flux surfaces are of the order of 4%. A series of tests and simulations performed to verify the accuracy of the x-ray diagnostic system is presented. The discrepancies found could imply the existence of asymmetries in impurity concentration.
Alcator C-Modの軟X線診断システムは、4つのアレイに配置された152個の検出器を備えており、等発光率面を取得するために使用される。これらの面は、トカマク中心からの伸長率と相対変位を与えることによって特徴付けられている。磁気診断によって提供されるフラックス面も、伸長率と変位を用いて記述されている。磁気診断とX線診断の2つの方法から得られた幾何学的パラメータの2組の比較結果が提示されている。我々は、これら2つの診断方法から得られた変位が常に良好な一致を示す一方で、対応する伸長率の曲線は異なるパターンを示すことを見出した。伸長率の2%より良い一致は、小半径の約2cmの範囲でのみ見られる。一方、伸長率はプラズマ端部と中心部に向かって10%異なることがある。X線診断の誤差棒は、検出器信号におけるランダム誤差の影響を伝播させることによって得られ、プラズマの端部と中心部付近の推定値の[数値]%に達する可能性がある。磁気フラックス面からの伸長率決定における推定不確かさは、約4%のオーダーである。X線診断システムの精度を検証するために実施された一連の試験とシミュレーションが提示されている。見出された不一致は、不純物濃度の非対称性の存在を示唆する可能性がある。