A new method for the estimate of the wall diffusion time of non-axisymmetric fields is developed. The method based on rotating external fields and on the measurement of the wall frequency response is developed and tested in EXTRAP T2R. The method allows the experimental estimate of the wall diffusion time for each Fourier harmonic and the estimate of the wall diffusion toroidal asymmetries. The method intrinsically considers the effects of three-dimensional structures and of the shell gaps. Far from the gaps, experimental results are in good agreement with the diffusion time estimated with a simple cylindrical model that assumes a homogeneous wall. The method is also applied with non-standard configurations of the coil array, in order to mimic tokamak-relevant settings with a partial wall coverage and active coils of large toroidal extent. The comparison with the full coverage results shows good agreement if the effects of the relevant sidebands are considered.
非軸対称場の壁拡散時間を推定するための新しい方法を開発した。この方法は、回転外部磁場と壁周波数応答の測定に基づいており、EXTRAP T2Rにおいて開発・試験が行われた。この方法により、各フーリエ高調波に対する壁拡散時間の実験的推定と、壁拡散のトロイダル方向非対称性の推定が可能となる。この方法は、三次元構造とシェルギャップの影響を本質的に考慮している。ギャップから離れた領域では、実験結果は均一な壁を仮定した単純な円筒モデルで推定された拡散時間と良好な一致を示す。この方法はまた、トカマクに関連する設定、すなわち部分的な壁被覆と大きなトロイダル方向広がりを持つ能動コイルを模擬するため、非標準的なコイル配列にも適用される。完全被覆の場合との比較では、関連するサイドバンドの影響を考慮すれば良好な一致が得られる。