A comparison of ASDEX Upgrade (AUG) discharges performed with carbon and the full tungsten wall shows that the pedestal performance at low triangularity is not altered without gas puffing. The pedestal electron pressure is the same for both wall materials as is the confinement. With the tungsten wall the natural density is higher even without an additional gas puff. In typical operation with gas puffing the density is again higher in tungsten. This results in a higher collisionality with the tungsten wall. Pedestal pressure and plasma confinement, however, are not degraded until very large amounts of deuterium are puffed.The edge localized mode (ELM) crash in typical AUG discharges is observed to be composed of two independent phases. This is observed for both the carbon and the tungsten wall. The 1st phase of the crash is unaffected by scans of the plasma parameters as long as the pedestal pressure remains constant. The duration of the 2nd phase is strongly anti-correlated with the separatrix density and can be suppressed by the application of nitrogen seeding for divertor cooling. A consistent explanation for the two phases of the ELM crash does not seem possible when considering only the pre-ELM pedestal profiles. The scrape off layer (SOL) plasma provides the necessary free parameter for a consistent explanation, indicating the importance of the SOL in understanding the ELM crash evolution.