Neutral density distribution in the divertor region of ASDEX Upgrade is estimated in different discharge conditions. The 2D divertor emission of Dα and Dγ is obtained with a tomographic inversion of their brightness measured by two cameras. From these emissions, 2D maps of neutrals density n0 can be obtained by a simple model that takes into account both excitation and recombination processes populating deuterium n = 3 and n = 5 levels. In attached discharges, the neutral density n0 is larger in the inner divertor, and when increasing core ne its maximum moves toward the dome and the outer divertor region. In particular, the modification of the n0 distribution is studied in plasmas where the mean electron density in the core increases, moving from an attached to a detached phase. In these discharges, the outboard midplane scrape off layer electron density increases and its profile flattens, with the formation of the so called density shoulder. The modification of the neutral density is followed during this evolution, showing that both the shape and the absolute value of the n0 distribution change in time, suggesting that they play a role in the two phenomena of shoulder formation and detachment. Moreover, in the detached phase, also the recombination contributes to the neutral deuterium emission.
ASDEX Upgradeのダイバータ領域における中性粒子密度分布が、異なる放電条件下で推定された。DαおよびDγの2次元ダイバータ発光は、2台のカメラによる輝度測定のトモグラフィー逆変換によって得られた。これらの発光から、重水素のn=3およびn=5準位を占める励起過程と再結合過程の両方を考慮した単純なモデルにより、中性粒子密度n0の2次元マップが得られた。付着状態の放電では、中性粒子密度n0は内側ダイバータでより大きく、コア電子密度の増加に伴い、その最大値はドームおよび外側ダイバータ領域へと移動する。特に、n0分布の変化は、平均コア電子密度が増加し、付着状態から非付着状態へと遷移するプラズマにおいて研究された。これらの放電では、外側赤道面スクレイプオフ層の電子密度が増加し、その分布は平坦化して、いわゆる密度ショルダーが形成される。この進展中の中性粒子密度の変化を追跡した結果、n0分布の形状と絶対値の両方が時間とともに変化することが示され、これらがショルダー形成と非付着の両現象において役割を果たしていることが示唆された。さらに、非付着状態では、再結合も中性重水素発光に寄与する。