The Joint European Torus (JET) fusion reactor was upgraded to the metallic wall configuration in 2011 which consisted of bulk beryllium (Be) tiles in the main chamber and bulk tungsten (W) and W-coated CFC tiles in the divertor (Matthews G.F. et al 2011 Phys. Scr.T148 014001). During each campaign, a series of wall damages were observed; on the upper dump plates (UDP) positioned to the top part of the vessel walls and on the inner wall—mainly affecting the inner wall guard limiters (IWGL). In both cases, it was concluded that the causes of these damages were unmitigated plasma disruptions. In the case of JET with the metallic wall configuration, most of these plasma disruptions were intentionally provoked. The overall objective was to study the behaviour of these phenomena, in order to assess their impact on the wall, improve understanding of morphological material changes, and—based on that—to develop, implement and test mitigation techniques for their prospective use on ITER. The current results bring additional information on the effects of the unmitigated plasma disruptions on the UDPs and are a significant extension of work presented in (Jepu et al 2019 Nucl. Fusion59 086009) where the scale of the damage after three operational campaigns on the Be top limiters of JET was highlighted. In addition, new data is presented on the damaging effect that the high energetic runaway electrons had on the Be IWGL in JET.
This paper examines the damage caused to beryllium limiters in the JET fusion reactor by uncontrolled plasma disruptions and high-energy runaway electrons. The study provides insights into the effects of these phenomena on the reactor wall, which is crucial for developing mitigation techniques for ITER.